I am in need for the bolt torque specs on a 88 common block 2.2 turbo such as motor mount bolt torc specs waterpump to block bolt torc value ect...
I am in need for the bolt torque specs on a 88 common block 2.2 turbo such as motor mount bolt torc specs waterpump to block bolt torc value ect...
Tight and tight. Don't think there are torq specs for those.
I would figure there are water pump specs since there is a gasket and 3.0's have torque specs there. Even the motor mount bolts are probably 40 or 50 or more depending on the bolt size. These days I try to torque everything that has a mechanical or sealing function or attaches to threaded aluminum.
Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56
I didn't see anything on the ddg site didn't check a manual tho
1988 Lancer Shelby 2.2TII 1989 Shadow ES 2.5TI 1992 Lebaron Sedan 3.0Auto 1993 Acclaim 2.5TI-A520 Hoard parts now!
1988 Lancer Shelby 2.2TII 1989 Shadow ES 2.5TI 1992 Lebaron Sedan 3.0Auto 1993 Acclaim 2.5TI-A520 Hoard parts now!