I got my sbec and cable yesterday. Where do I connect the tuning cable? I looked for a connector at the ds strut tower but didn't see anything that looked like the cable end. This is a swapped sbec setup out of a 91 daytona.
I got my sbec and cable yesterday. Where do I connect the tuning cable? I looked for a connector at the ds strut tower but didn't see anything that looked like the cable end. This is a swapped sbec setup out of a 91 daytona.
Is the SBEC socketed?
Yes rob did the socketing
If the cable is like the one I have, you'll plug one end into the your laptop (usb) and the other to the port a scan tool or DRB would plug into, though I'm not sure where you'd find it on your car, on most of the cars I've got, it's on the pass side, and kind of tucked up away from things, might even have a rubber cap over it to keep it clean/uncorroded.
Mike
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry
Bad laws are the worst sort of tyranny.
- Edmund Burke
There should be a plug attached to the harness bundle right near the SBEC 60 way. Its possibly plugged into a dummy plug, so you might not notice it.