Page 8 of 8 FirstFirst ... 45678
Results 141 to 154 of 154

Thread: Connectors

  1. #141
    Mitsu booster
    Join Date
    May 2008
    Location
    wisconsin
    Posts
    40

    Re: Connectors

    Quote Originally Posted by 135sohc View Post
    http://starparts.chrysler.com/starli...2pin_page2.htm
    http://starparts.chrysler.com/starli...2pin_page3.htm
    http://starparts.chrysler.com/starli...2pin_page4.htm
    http://starparts.chrysler.com/starli...2pin_page5.htm

    I have a 5013949AA kit here. The terminals are a miniature version of the now known Molex pin used on the computer 60 way connection (33088-0009) so certainly these are of the same family or series ?
    I'm actually trying to track these down now. I know who makes the housings and am getting quotes on all 4 key options. I have a Cardell and Mopar part number on the terminals as well.

  2. #142
    Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    5,707

    Re: Connectors

    Anyone got any contact info for Chipdogg ?
    1994 Shadow Sedan. 2.2 N/A, A568 333,000 miles (Owned in family since new).
    1987 Shelby CSX #418. Long term rebuild and restore.

  3. #143
    Mitsu booster
    Join Date
    Aug 2008
    Location
    Florida
    Posts
    4

    1991 Daytona Fuel Pump Connector?

    I'm working on upgrading my fuel pump, and in the process found I have a dying Airtex E7040M. I'm trying to match the connector on it, which appears to be the same connector as is on the car's wiring harness (it plugs in to both sides of the bulkhead connector). The pumps changed in 1991, so anything older than that won't work. I have some pics to attach, but I guess my post count is not high enough. The connector has 2 pins and is marked AMP and has round female terminals inside. I'll try to edit or repost after I get some more posts here.

    EDIT
    Here are the pics via Photobucket:






    Last edited by Daytona_Shopper; 03-18-2017 at 08:22 PM.

  4. #144
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,200

    Re: Connectors

    Does anyone have a source for a 4-wire O2 sensor pigtail, harness side? I can't seem to locate one for the life of me. Need the square one like is used in 89 and early 90's, I think.

    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  5. #145
    Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    5,707

    Re: Connectors

    used salvaged. I asked before about the idea of using a newer 4 wire sensor that one could get new connector shells and terminals for and the crickets chirped..
    1994 Shadow Sedan. 2.2 N/A, A568 333,000 miles (Owned in family since new).
    1987 Shelby CSX #418. Long term rebuild and restore.

  6. #146
    Resident Nutball Turbo Mopar Contributor
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    305

    Re: Connectors

    Quote Originally Posted by 135sohc View Post
    used salvaged. I asked before about the idea of using a newer 4 wire sensor that one could get new connector shells and terminals for and the crickets chirped..
    Really? I must have missed the post. I recommend using an O2 sensor from a Neon SRT-4. Use the Denso or the NTK.

    http://www.rockauto.com/en/moreinfo....sn=492&jsn=492

    The interfacing connector is TE. I actually outline what it is in my original post in this thread!

    Quote Originally Posted by Turbo SOB View Post
    More alternative parts with better connectors:
    184246-1 (TE 2+2 pin Male SSC) - Oxygen Sensor (later, including Neon SRT-4) HAVE - verified with '05 O2 sensor from my truck
    173706-1 (TE Male, Bag, Tin, 16-20 AWG) HAVE - verified, but I would prefer a slightly longer blade option
    171631-1 (TE Male, Reel, Tin, 20-24 AWG) In Stock
    Quote Originally Posted by Turbo SOB View Post
    184140-1 (TE Cable Seal, 1.6 - 2.1 mm Insul. O.D.) HAVE
    176886-2 (TE Cable Seal, 1.8 - 2.6 mm Insul. O.D.) HAVE - used this to verify the O2 sensor conn/term
    http://www.mouser.com/ProductDetail/...TAdssKDimMXw==

    Here's a pic of a sensor I have in my computer bag at all times (for reasons unknown).

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSC_2433.jpg 
Views:	103 
Size:	536.9 KB 
ID:	61153  

  7. #147
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,200

    Re: Connectors

    Quote Originally Posted by 135sohc View Post
    used salvaged. I asked before about the idea of using a newer 4 wire sensor that one could get new connector shells and terminals for and the crickets chirped..
    That's what I was considering doing.

    How about TIII Coil pack connector? I need one of those also, and for some reason I seem to remember them being the same as the O2 sensor. And I think the early Neons used the same connector for the coil pack maybe?

    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  8. #148
    Resident Nutball Turbo Mopar Contributor
    Join Date
    Mar 2007
    Location
    Michigan
    Posts
    305

    Re: Connectors

    Quote Originally Posted by Force Fed Mopar View Post
    How about TIII Coil pack connector? I need one of those also, and for some reason I seem to remember them being the same as the O2 sensor. And I think the early Neons used the same connector for the coil pack maybe?
    No, sorry. It uses a Delphi Apex 2.8 series connector.
    http://www.rockauto.com/en/moreinfo....431715&jsn=437
    You might be able to use this coil pack in a TIII, if you can get it to fit.

  9. #149
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,200

    Re: Connectors

    It's the early 3.3/3.8 coilpacks that have the same plug. Not that they are any easier to find a new connector for

    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  10. #150
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,200

    Re: Connectors

    Quote Originally Posted by minigts View Post
    Here is the link to a vendor whom I've used that sells wire in various colors, various gauges at various lengths.

    http://eagleday.com/auwi2.html This is the link for the 16-18 gauge wire.
    Thanks for this, just ordered a bunch of wire from them to finish my TIII swap wiring with. Best pricing I could find on small amounts.

    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  11. #151
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,200

    Re: Connectors

    Quote Originally Posted by Force Fed Mopar View Post
    Thanks for this, just ordered a bunch of wire from them to finish my TIII swap wiring with. Best pricing I could find on small amounts.
    Well I just filed a dispute with PayPal over this, about 2 weeks and never got a shipment notice or tracking number, and have not received the wire nor any other communication from them, even after sending emails to their various addresses. So, guess I'll have to buy wire from somewhere else. Figured I'd update so others don't have the same hassle.

    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  12. #152
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,200

    Re: Connectors

    Quote Originally Posted by Force Fed Mopar View Post
    Thanks for this, just ordered a bunch of wire from them to finish my TIII swap wiring with. Best pricing I could find on small amounts.
    Quote Originally Posted by Force Fed Mopar View Post
    Well I just filed a dispute with PayPal over this, about 2 weeks and never got a shipment notice or tracking number, and have not received the wire nor any other communication from them, even after sending emails to their various addresses. So, guess I'll have to buy wire from somewhere else. Figured I'd update so others don't have the same hassle.
    Apparently the dispute woke them up, wiring got shipped last week and showed up today. So I guess they are still in business

    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  13. #153

    Re: Connectors

    Quote Originally Posted by Force Fed Mopar View Post
    Apparently the dispute woke them up, wiring got shipped last week and showed up today. So I guess they are still in business
    That stinks to hear you had issues, but glad they resolved it. I've always had good experiences with them, but this makes me a little concerned if I place another order. Thanks for the update!
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  14. #154
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,200

    Re: Connectors

    Quote Originally Posted by minigts View Post
    That stinks to hear you had issues, but glad they resolved it. I've always had good experiences with them, but this makes me a little concerned if I place another order. Thanks for the update!
    Well, I probably could have called too, but I rarely have time to think about it during business hours.

    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

Page 8 of 8 FirstFirst ... 45678

Similar Threads

  1. Deutch connectors??
    By 135sohc in forum Electrical & Fuel System
    Replies: 11
    Last Post: 02-29-2012, 12:15 AM
  2. Missing connectors
    By jory in forum Electrical & Fuel System
    Replies: 8
    Last Post: 07-15-2009, 02:46 AM
  3. Subframe connectors
    By tommyturbo in forum Interior, Exterior and Chassis Modifications
    Replies: 79
    Last Post: 03-03-2009, 02:46 AM
  4. sub frame connectors?
    By kwiksilver in forum Suspension, Brakes, Wheels, Traction
    Replies: 3
    Last Post: 03-03-2008, 01:43 PM
  5. Weatherpack connectors?
    By Tony Hanna in forum Electrical & Fuel System
    Replies: 3
    Last Post: 05-21-2007, 07:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •