Page 14 of 14 FirstFirst ... 41011121314
Results 261 to 270 of 270

Thread: Connectors

  1. #261
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,442

    Re: Connectors

    Are the smaller bulkhead terminals available anywhere? The Z1 wire at the bulkhead on Joy's Daytona is not ideal to say the least. This whole harness actually makes me wonder how it was the nicest running LM car I've ever had.

    Anyway, if I could get the smaller ones, or even the larger ones I could replace or repin the connector.

  2. #262

    Re: Connectors

    Are you referring to the female connectors for the 40 way through the firewall?

    Sent from my Pixel 7 using Tapatalk
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  3. #263
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,442

    Re: Connectors

    Quote Originally Posted by minigts View Post
    Are you referring to the female connectors for the 40 way through the firewall?

    Sent from my Pixel 7 using Tapatalk
    I need the male connectors at the least. I need the thinner ones if possible. The Z1 wire is very, very sad.

  4. #264
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,442

    Re: Connectors

    Has anyone drilled straight through the bulkhead connector just to pass a wire though? Seems like that would be a pain, but I don't need to remove the bulkhead very often, and if I use a deutsch connector, the circular pin should pass right through.

    I've been unable to locate any pins for the bulkhead. If anyone has other ideas, I'm all ears.

  5. #265

    Re: Connectors

    I removed the 40 way and am running the Deutsch connectors in place of it. The gold headlight switch housing connectors work ok for the female replacement terminals, but there is a lot of play and if I remember correctly, I had to basically get under the dash and push them on after the 40 way connectors were bolted back in place.

    Sent from my Pixel 7 using Tapatalk
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  6. #266
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,442

    Re: Connectors

    Mission creep time it may be. Are those autosport connectors? I have plenty of terminals, but would need those housings. I'm assuming they're some sort of bulk head connector? Did you sandwich two pieces of plastic in there to keep it in place through the hole?

    ETA:

    This bad lad takes size 16 terminals and would be a good solution for availability of terminals and wire sizes. I haven't measured the stock bulkhead yet, though.

    ETA: The link: https://www.deutschconnector.com/pro...ay_connectors/
    Last edited by cordes; 08-20-2023 at 10:15 PM.

  7. #267

    Re: Connectors

    The picture is before I used the threaded nut and wave washer to secure them in place. I was just taking one for posterity since I don't do that great of a job documenting as I go.

    This is a link to one of the plugs I bought I may still use for the sub-harness. But there are a number of configurations you can get with wire sizes and wire count. This one had a threaded body that I cut off with a Dremel since I didn't need it. If you go this route, just be sure to look at the housing to confirm you get the right one.

    Housing
    https://www.mouser.com/ProductDetail...rrencycode=USD

    12g Housing
    https://www.te.com/usa-en/product-HD...mpaignId=37423

    16-18g Housing Receptacle
    https://www.te.com/usa-en/product-HD...mpaignId=37423

    16-18g Housing Plug
    https://www.te.com/usa-en/product-HD...mpaignId=37423

    Sleeve
    https://www.mouser.com/ProductDetail...rrencycode=USD

    Housing Nut
    https://www.mouser.com/ProductDetail...rrencycode=USD

    Wave Washer
    https://www.te.com/usa-en/product-24...mpaignId=37423

    Sent from my Pixel 7 using Tapatalk
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  8. #268
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,442

    Re: Connectors

    Thanks for the links. That's really helpful. I'm torn as to what I should do. I think drilling out one of the larger, unused terminal slots in the 50 way would easily allow for a 12ga tefzel wire to pass through. That would more than handle enough current for any fuel pump I want to use. At the same time, I do like the modern features and flexibility the Deutsch connectors offer. It may come down to a matter of time commitment on this though. It doesn't have to go to space, it just has to run at 7-12PSI to be honest.

  9. #269

    Re: Connectors

    Check out the product catalog, there is a square bulk connector, but unsure how common the terminals are or if it uses the barrel type ones. Product catalog link is in one of the links, just need to scroll down on the page to find it.

    Sent from my Pixel 7 using Tapatalk
    [SIZE="3"] [B]Jon Trotter[/B][/SIZE] [B]1985[/B] Dodge Shelby Charger, Currently decommissioned [B]1987[/B] Shelby GLHS, #937 [B]1987[/B] Shelby Lancer, #628 [QUOTE=Reeves;587010]I can be ready. Please send pics of wife. _____DodgeZ add comments here______[/QUOTE]

  10. #270
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,442

    Re: Connectors

    My 12ga Tefzel wire came in today. It will pass through the opening for the male terminal, so I think I'll just slide it through and use a Deutsch connector to mate the two halves together. If I need to separate the bulkhead, I can just remove the pin and go from there.

Page 14 of 14 FirstFirst ... 41011121314

Similar Threads

  1. Deutch connectors??
    By 135sohc in forum Electrical & Fuel System
    Replies: 11
    Last Post: 02-29-2012, 12:15 AM
  2. Missing connectors
    By jory in forum Electrical & Fuel System
    Replies: 8
    Last Post: 07-15-2009, 02:46 AM
  3. Subframe connectors
    By tommyturbo in forum Interior, Exterior and Chassis Modifications
    Replies: 79
    Last Post: 03-03-2009, 02:46 AM
  4. sub frame connectors?
    By kwiksilver in forum Suspension, Brakes, Wheels, Traction
    Replies: 3
    Last Post: 03-03-2008, 01:43 PM
  5. Weatherpack connectors?
    By Tony Hanna in forum Electrical & Fuel System
    Replies: 3
    Last Post: 05-21-2007, 07:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •