Ha, you have no idea...
Asa, you rock and I would love to be able to send you more parts if you are interested.
Ha, you have no idea...
Asa, you rock and I would love to be able to send you more parts if you are interested.
Well, I did buy the Masi 16v intake manifold flange that was recently on eBay. So I have that, and also some valve cover vent ports that were on a prototype engine I bought last year. These wouldn't take much aluminum to do, and 'should' work on production heads as well. Just food for though, and no problem with you wanting to finish the 2.2/2.5 intake manifold first!
Asa, I need to get you my oil filler cap. I keep meaning to get pictures for you. My head is kind of buried.
I'd be down for an intake manifold flange. I'd rather not cut up my stock one.
Another part would be exhaust manifold flanges. The one I have is very nice, it is stainless and is water jetted out, so I don't know if that would be something you could do. There are a few that have been able to make the stock manifold work with a larger turbo without this spacer flange, but using that flange is one of the better/easier ways to do it.
I still would like to have a stock-sized crank pulley, but made out of aluminum. Maybe include a mounting provision for a 36-1 tone ring.
Sounds juicy. Before we start shipping stuff though, lets test the waters to make sure there is interest. I'd say a couple new-item-specific threads would be in order. One for the oil cap, and one for both the intake and exhuast flanges. Id probably steer clear of the crank pulley at the moment though, but perhaps return to it later.
Agreed, and I would certainly be interested an intake manifold flange. I have a couple flanges that I would be happy to send if/when the time is right. Hell, I'll send a whole cylinder head if it warrants it. The Masi 16v head is surprisingly light/compact compared to the TIII head.
Yup. Masi head is around 44#'s. I'd have to re-look it up in my build thread because I know that number is close, but there was something that wasn't on the head, so it wasn't fully dressed IIRC.
Just weighed the new casting I have here, which only has valve guides and seats, and all of the many studs for the intake/exhaust manifolds, thermostat housing, and cam caps. 27 lbs.
No valve cover, cams, valves, springs, buckets, shims, retainers, etc.
1. iTurbo (shipped)
2. iTurbo (shipped)
3. Reaper1 (delivered)
4. 4-lbodies (shipped)
5. Argosy1430Z (50% deposit rcvd)
6. AZOrion (50% deposit rcvd)
7. AZOrion (50% deposit rcvd)
8. rofly1 (50% deposit rcvd)
9. sctc (50% deposit recvd)
10. sctc (message sent)
11. sctc (message sent)
12. 'Lil_omni (message sent)
13. AZOrion (50% deposit rcvd)
this update is a little late..the ones listed as shipped actually shipped a few days ago.
I have 4 more machined and they just need some tapping. I will try to ship them tomorrow.
1. iTurbo (shipped)
2. iTurbo (shipped)
3. Reaper1 (delivered)
4. 4-lbodies (shipped)
5. Argosy1430Z (50% deposit rcvd)
6. AZOrion (shipped, waiting for remaining 50%)
7. AZOrion (shipped, waiting for remaining 50%)
8. rofly1 (shipped, waiting for remaining 50%)
9. sctc (50% deposit recvd)
10. sctc (message sent)
11. sctc (message sent)
12. 'Lil_omni (message sent)
13. AZOrion (shipped, waiting for remaining 50%)
some more have been shipped, please send remaining 50%! thank you!
Just got my new housings in the mail today, thanks again Asa.
You can send the stock housing back whenever you want....no rush.
1. iTurbo (shipped)
2. iTurbo (shipped)
3. Reaper1 (delivered)
4. 4-lbodies (shipped)
5. Argosy1430Z (50% deposit rcvd)
6. AZOrion (shipped, paid in full)
7. AZOrion (shipped, paid in full)
8. rofly1 (shipped, waiting for remaining 50%)
9. sctc (50% deposit recvd)
10. sctc (message sent)
11. sctc (message sent)
12. 'Lil_omni (message sent)
13. AZOrion (shipped, paid in full)
thank you AZOrion!!
I checked the two housings I bought from Asa tonight on the 'mock-up motor' and a production engine that has never been apart on an engine stand. They seem to fit great!
1. iTurbo (delivered, paid in full)
2. iTurbo (delivered, paid in full)
3. Reaper1 (delivered, paid in full)
4. 4-lbodies (shipped, paid in full)
5. Argosy1430Z (50% deposit rcvd)
6. AZOrion (shipped, paid in full)
7. AZOrion (shipped, paid in full)
8. rofly1 (delivered, paid in full)
9. sctc (50% deposit recvd)
10. sctc (message sent)
11. sctc (message sent)
12. 'Lil_omni (message sent)
13. AZOrion (shipped, paid in full)
thanks rofly1!!
1. iTurbo (delivered, paid in full)
2. iTurbo (delivered, paid in full)
3. Reaper1 (delivered, paid in full)
4. 4-lbodies (shipped, paid in full)
5. Argosy1430Z (shipping tomorrow, waiting for remaining 50%)
6. AZOrion (shipped, paid in full)
7. AZOrion (shipped, paid in full)
8. rofly1 (delivered, paid in full)
9. sctc (shipped, waiting for remaining 50%)
10. sctc (message sent)
11. sctc (message sent)
12. 'Lil_omni (unable to reach. removing from group buy)
13. AZOrion (shipped, paid in full)
Another two shipped, please send the remaining 50%!
I have been unable to reach Lil_omni for weeks. I dont have enough material left to machine any more without buying enough for at least 4, so I am removing Lil_omni from the group buy, sadly. I may machine more of these in the future but I'm done for the moment. If anyone is interested in one please post here.
1. iTurbo (delivered, paid in full)
2. iTurbo (delivered, paid in full)
3. Reaper1 (delivered, paid in full)
4. 4-lbodies (shipped, paid in full)
5. Argosy1430Z (shipping tomorrow, waiting for remaining 50%)
6. AZOrion (shipped, paid in full)
7. AZOrion (shipped, paid in full)
8. rofly1 (delivered, paid in full)
9. sctc (shipped, paid in full)
10. sctc (message sent)
11. sctc (message sent)
12. 'Lil_omni (unable to reach. removed from group buy)
13. AZOrion (shipped, paid in full)
thank you sctc!
Also, NEWS FLASH:
I am selling prototype #1 and prototype #2 at steep discounts!
Both of them will require modification in order to fit. The tstat housing you end up using with them will also likely require modification.
I have no way to verify or test whether or not modifiying them will work, and I cant accept returns for them for any reason, so please carefully read the R&D thread to see what the fitment pictures showed about them before you decide to purchase either one!
Prototype #1 has a very rough finish with some machining errors on the head flange. It will also likely need more heavy modification to fit than prototype #2, so I am selling it for only $50 shipped!
Prototype #2 has a production quality finish, and will likely require more minor modification than prototype #1, so I'm selling it for $99 shipped!
If you are interested just send the paypal to acannell@gmail.com. Make sure to send your shipping address in the paypal notes!
Again, please do your research in the R&D thread before considering spending your hard earned money on these risky prototypes!
The R&D thread is here:
http://www.turbododge.com/forums/f32...ml#post3241362
The pictures show some untapped holes, but all holes will be tapped when you receive either one.
The first picture is prototype #1, and the second is prototype #2. There are many more pictures including fitment test pictures in the R&D thread.
Last edited by acannell; 05-13-2014 at 05:04 PM.
1. iTurbo (delivered, paid in full)
2. iTurbo (delivered, paid in full)
3. Reaper1 (delivered, paid in full)
4. 4-lbodies (shipped, paid in full)
5. Argosy1430Z (delivered, waiting for remaining 50%)
6. AZOrion (shipped, paid in full)
7. AZOrion (shipped, paid in full)
8. rofly1 (delivered, paid in full)
9. sctc (shipped, paid in full)
10. sctc (shipped, paid in full)
11. sctc (shipped, paid in full)
12. 'Lil_omni (moved to next group buy)
13. AZOrion (shipped, paid in full)
Thank you sctc!!
Awesome! Looks like this has been a successful Group Buy to me! Thanks to all for supporting this!!! I seriously appreciate having this part in hand and ready to go.