3.8 throttle body 94-95

[omnidaddio]

My understanding is...I need a 94-95 minivan 3.8 58mm throttle body if I want to do an upgrade to my 2.5 t2 two piece intake. Is that the only years that I should look for? Anybody have the part numbers?

[cordes]

Are you asking what years the 58mm TB is available, or if you can only use the 58mm TB, or both of those at the same time? You can install a 52mm TB. I know that Some Jeeps have the 58mm TB on them. IIRC the best way to identify the 58mm version is by the fact that it has one barb on the top. Pull it off and verify that it's a 58mm unit.

[omnidaddio]

Are you asking what years the 58mm TB is available, or if you can only use the 58mm TB, or both of those at the same time? You can install a 52mm TB. I know that Some Jeeps have the 58mm TB on them. IIRC the best way to identify the 58mm version is by the fact that it has one barb on the top. Pull it off and verify that it's a 58mm unit.

Is it only the 94-95 3.8 grand caravan/chrysler town and country vehicles that have the 58mm T.B. I need to be keying on, or are there some others? That's why I wanted a part number.

[cordes]

No, it's not just on those. Frankly, I didn't realize that those got the 58mm TB. I thought all of the early to mid 90s vans got the 52mm TBs.

[omnidaddio]

I'm having a difficult time trying to find one. Live in a smallish town, so I'm having to go via Ebay or other similar sites.

[cordes]

I see. I thought you were trying to find one in the JY. I would put up a wanted post on here. I've seen them go for $40-50 pretty regularly.