These two videos bring me up to where I was currently am in this project here in Jan 2014. As soon as the weather permits I will start working on the control system. The first video show how the actuator moves the pulleys and the second video shows the engine running for the first time with the system installed but locked in the advanced position with a piece of rubber hose on the actuator. When I tilt the camera you can see the idler keeping the belt snug. The vibration of the actuator is from the belt being cold and stiff. It smooths out in about two minutes of running. I am working on a damper to put on it and there is another brace that goes to the actuator brace that I cannot put on till I get the compressor mounted back up.