Results 1 to 14 of 14

Thread: Need a NACA front air dam

  1. #1
    Garrett booster
    Join Date
    Jun 2012
    Location
    Marysville, Ohio
    Posts
    73

    Need a NACA front air dam

    Looking for a front NACA air dam! Can anybody Help!

  2. #2
    Supporting Member Turbo Mopar Contributor zin's Avatar
    Join Date
    May 2006
    Location
    ca
    Posts
    4,479

    Re: Need a NACA front air dam

    Do you have a picture of what you're looking for? I'm not sure what a NACA front air damn is, I'm imagining it is something available through direct connection back in the day?...

    Mike
    "The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry

    Bad laws are the worst sort of tyranny.
    - Edmund Burke

  3. #3
    Garrett booster
    Join Date
    Jun 2012
    Location
    Marysville, Ohio
    Posts
    73

    Re: Need a NACA front air dam

    Its what was on the birthday car Click image for larger version. 

Name:	cindyandthebirthdaycar_009.jpg 
Views:	74 
Size:	69.9 KB 
ID:	48147Click image for larger version. 

Name:	bday4.jpg 
Views:	77 
Size:	31.4 KB 
ID:	48148

  4. #4
    Supporting Member Turbo Mopar Contributor zin's Avatar
    Join Date
    May 2006
    Location
    ca
    Posts
    4,479

    Re: Need a NACA front air dam

    Ok, I can see the dummy NACA ducts on the sides, makes sense now.

    The question becomes, who made these, assuming it wasn't a one-off, and what did they refer to them as, or even better, the part number.

    While unlikely, one of their dealers could have one gathering dust in a warehouse, but without a part number or catalog name, folks might not make the connection.

    I'm afraid this is the extent of help I can provide, as I have zero body kit pieces, but perhaps the thread will get someone's attention who does.

    Mike

    - - - Updated - - -

    Ok, I can see the dummy NACA ducts on the sides, makes sense now.

    The question becomes, who made these, assuming it wasn't a one-off, and what did they refer to them as, or even better, the part number.

    While unlikely, one of their dealers could have one gathering dust in a warehouse, but without a part number or catalog name, folks might not make the connection.

    I'm afraid this is the extent of help I can provide, as I have zero body kit pieces, but perhaps the thread will get someone's attention who does.

    Mike
    "The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry

    Bad laws are the worst sort of tyranny.
    - Edmund Burke

  5. #5
    Garrett booster
    Join Date
    Jun 2012
    Location
    Marysville, Ohio
    Posts
    73

    Re: Need a NACA front air dam

    thank you for your insight and help thanks again hopefully I will find one, I need it to fix my car! HELP!!!! if not I will just have to mold them myself in the air dam I have.

  6. #6
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,464

    Re: Need a NACA front air dam

    Have you tried calling Kaminari directly to see if they have any left or know of any? Looks like they're selling one that's closer to the original now.

  7. #7
    Hybrid booster Turbo Mopar Contributor
    Join Date
    Apr 2006
    Location
    SoCal
    Posts
    902

    Re: Need a NACA front air dam

    what he said......looks like a Kaminari piece

  8. #8
    Garrett booster
    Join Date
    Jun 2012
    Location
    Marysville, Ohio
    Posts
    73

    Re: Need a NACA front air dam

    I have one from kaminari for my red car. It is like the original but they don't have the naca duct one anymore....I am needing this naca one to make the car right!!!!

  9. #9
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,464

    Re: Need a NACA front air dam

    Is this to go with the rear piece that you recently replaced so that they match? Or were you able to find an original piece for the rear of that car?

  10. #10
    Garrett booster
    Join Date
    Jun 2012
    Location
    Marysville, Ohio
    Posts
    73

    Re: Need a NACA front air dam

    found one for that car! This is for the car I just bought sorry I didn't mean to be confussing

  11. #11
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,464

    Re: Need a NACA front air dam

    Quote Originally Posted by jans6pkrt View Post
    found one for that car! This is for the car I just bought sorry I didn't mean to be confussing
    No worries. I was just wondering how that situation turned out. Not ideal for sure.

  12. #12
    Garrett booster
    Join Date
    Jun 2012
    Location
    Marysville, Ohio
    Posts
    73

    Re: Need a NACA front air dam

    got it he paid for it and all is good. Now I need another one what a headache...the car has a good original style one on it but I need the naca one so if anyone has a naca and wants an original style one I will trade

  13. #13
    Garrett booster
    Join Date
    Jun 2012
    Location
    Marysville, Ohio
    Posts
    73

    Re: Need a NACA front air dam

    sfasfa

  14. #14
    Garrett booster
    Join Date
    Jun 2012
    Location
    Marysville, Ohio
    Posts
    73

    Re: Need a NACA front air dam

    anybody have one!

Similar Threads

  1. Front air dam install on a K-car
    By A.J. in forum Interior, Exterior and Chassis Modifications
    Replies: 11
    Last Post: 11-28-2013, 12:43 PM
  2. Replies: 3
    Last Post: 02-14-2012, 04:34 PM
  3. General lancer es front air dam
    By schrenkma in forum Parts Wanted
    Replies: 3
    Last Post: 03-29-2011, 08:03 PM
  4. General Shelby Charger front air dam
    By redbaron in forum Parts For Sale
    Replies: 0
    Last Post: 02-05-2009, 09:52 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •