I have 3 sets of T-Tops all with keys (one key so worn its like a "Skeleton" key). The plastic trim has already been requested (sorry) If you still want the T-tops LMK I'd like to check shipping first as the glass is pretty heavy/bulky. But I think your offer is fair. I'll get back to you.
Last edited by powermaxx; 12-31-2013 at 07:28 PM. Reason: Prior PM offer on the trim was received.
I think I have all of this sorted out as I went back thru the thread and looked at time stamps on the requests, etc... Don't want to promise something already sold, etc... so here is what I have so far.
Looneytuner: both hockey sticks and the matching part at the rear of the door windows and the window scrapers, cubby hole with the cup holder
87csx51 (Got first dibs on the trim via PM) t-top trim above the windshield
Daniel Jackson wants: plastic part that is between the windshield and the t-tops (87csx51 was first on the trim). Set of T-tops with key(s) LMK if you're still interested
jayspartanburg: driver side outside door handle
Are the black plastic A-pillar covers on the outside still available? IF you can remove them without them breaking, i'd be interested.
Thanks,
Lee
Working on the A pillar trim now, so far so good (snow and 8 degrees so no work this weekend). It needs to come out anyway and with the cold here I'm going slow so it don't go "snap". I'll let you know how they come out (I've been searching for removal tips so if you have any let me know). Most of the driver side trim is off the car (learning on driver side so pass side should go quicker). I believe your request is the first for the A pillar trim.
Looneytuner: both hockey sticks and the matching part at the rear of the door windows and the window scrapers, cubby hole with the cup holder
correct. Shipping to 63043 Please pack in at least two layers of corrugated cardboard and insure.
Updates? Just curious. Again, not in a rush....
-Lee
Got all the requested parts pulled (dancing on a wet steel trailer with this torn ACL was a lot of fun ). I removed all of it with no damage but there was some prior damage from the original install or maybe just from the normal wear and tear. I'll send some pics to all parties concerned and discuss details via PM.(Pics in my cell phone and looking for my cable!!!!)
All pieces are usable and in reasonable shape but I'll let you make the call.
No other parts (off this car) are available as it has been sold.
How much for the headlight module?
Fuzz
Updated all who wanted parts (except Looneytuner, I have to make your box!) and PM's sent with paypal info. LMK if I missed anyone.
Looneytuner I'll have your info tomorrow.