Date: 09th November 2013
Username: minigts
Full Name: Jon Trotter
City, State, Zip: Memphis, TN 38049
Contact: PM for email and phone
Got a lot of things here. Please ask for more pictures or information if you need it. All prices are listed with shipping included, unless specified. Prices are negotiable, unless otherwise stated. There are no warranties on anything. If you have negative feedback or bad history on this board, don't even bother.
Talon BOV Aluminum flange with pipe
Price: $100 shipped
This was custom built by Slowe Speed for my GLHS. It was designed to run from a stock intake (2 piece, but pretty sure it will work for a 1 piece) to the stock Intercooler upper inlet. I can send it with two blue silicone hose ends if you want it or it can be shipped without. Brian does incredible work with welding as can be seen. Both ends are bead rolled as well. The inlet/outlet is 2.5". Let me know if you need more pics or have questions.
A-523 TransmissionSOLD
Price: $100 delivery preferred, actual shipping will be added if delivery is not an option
Unknown condition on this, but I can dismantle it and check the insides.
Mopar CV Boot Kit, OEM
Price: $25 shipped
OEM CV boot kit, comes with the bands and boot and whatever else is in the package.
83-84 Shelby Hood
Price: $25 + shipping
The hood overall is in good shape, but the corners have been bent probably from the hood flying up. I can get some better pictures if needed.
Bare Carb Intake SOLD
Price: $50 shipped
The part number is on it, 4105449. I can get better pics if needed.
Carb Intake with Holley Carb
Price: $110 shipped
The part number is the same and has a Holley carb with it. I have no idea the condition, so if you need me to check something out just let me know. I actually have two of these and a bunch of spare parts, assuming for rebuild. I'll let both of these go, the spare parts and the intake for the price above. Let me know if you're interested.
Engine Rods SOLD
Price: $60 for a set, $100 for all 7
All seem to be in good condition by visual inspection.
Rod Shifted Stock Shifter Bushings GONE
Price: $20 shipped
These are the stock rubber bushings that would be good for a factory style rebuild.
Miscellaneous Rod Shifter pieces SOLD
Price: $8 shipped for most
/per
There are a lot of pieces here, only a few are NOS. There is one set of new rods (one multi-bend and one with the small bend), one main rod threaded stud and one transmission bracket that is new. I will set this as a set for $40 shipped since they have never been used. All else, $8 shipped.
Transmission Extension Housing, OEM
Price: $30 shipped
This is the piece that bolts to the transmissions. Not sure if this is interchangable between transmissions or not. Looks to be new or never used. I can get the part number if needed. Comes with a seal that is new as well.
Stock thermostat with gasket, OEM
Price: $20 shipped
This is new in the package.
Stub Control Arm Bushings
Price: $30 shipped
Still in the package.
Goodyear Racing Tires 23x8x15
Price: $300 plus shipping
These are in decent condition...I think. I have no idea what they look like new, but they seem to have decent wear on them. I can't find any pricing on these online, but I think the price is fair for a set. They do not come with wheels, just the tires. I can price out shipping or deliver if it is convenient.
Replacement Carpet for 89 CSX
Price: $145 shipped
This carpet is VERY new, only months old and was only in the car for a short time. I trimmed it and got closer than I wanted with the center console and by the arm rest. I don't have pictures of it installed and the issues, as I had all the interior out until I had it painted. It's very possible that the carpet is covered up enough by the shifter area (this is where I thought it was cut too short, but I did not confirm this), but I don't know. However, the rest of the carpet fits great and actually fits better than the replacement one I got. This is not the stock color, it's darker but in great shape, clean and has the mass backing insulation. I have the box for it, so it's ready to ship. This was close to $280 when I bought it (with shipping), figuring about $20 for shipping.
I have some extra carpet if you feel you could mend it back together. I know it can be done for house carpet, so I don't see why it couldn't be done for this stuff. I'll send along whatever extra I have, which is a good bit of larger sections I had to cut off along the sides.
Upper 2 Piece Plenum NO LONGER AVAILABLE
Price: $100 shipped
Bought this to port, but don't plan to stick with a stock intake. This is really good shape paint-wise and only needs a fresh gasket. Has the block off plate for the EGR, not sure what year that means, maybe 86?
TII Stock Garret Turbo PENDING SOLD
Price: $165 shipped
The turbo was pulled from a running vehicle. I don't remember if it was burning oil at idle or not, but I know it was not pushing oil out or had any driveability issues. The car was running with this turbo at SDAC and I don't remember it even burning oil at idle while sitting. Does not come with the swingvalve, but if you want the one attached (item below, 3" TU one), please let me know and I can leave them together. Does not come with any coolant or oil lines, but does come with the fittings. I'll have to confirm which oil one is on it, don't think it was used when the new turbo was installed. Pics will come later tomorrow probably.
TU 3" Swingvalve with Xylar coating SOLD
Price: $275 shipped and firm
Version 2 of this item. DOES NOT have the dual Ford/Chrysler pattern. One or two of the mounting holes was/were modified on the SW to allow a 1/2" socket to fit the bolt head. I think only one of the bolts requires a 12 point bolt head. ANY bolts that are in the box/attached to the turbo will come with it. The SW was coated with Xylar AFTER the mod to the SW for the bolts was done. So far it has held up really well. Will get pics along with the turbo when I can, hopefully tomorrow. If you want the SW and the turbo let me know. New TU units are $275 and not coated, so please keep that in mind.