Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: Patring out: 1990 Sundance 4 door

  1. #1
    turbo addict
    Join Date
    Dec 2005
    Location
    Fayette City, Pennsylvania
    Posts
    1,943

    Patring out: 1990 Sundance 4 door

    Parting out a sundance I just brought home. 2.5 NA. Runs good, but underneath is rotted out. 4 door car. Anything you might need from it? Let me know. Car will be getting sent to the scrapper next Saturday.

  2. #2
    Mitsu booster
    Join Date
    Jun 2013
    Location
    Tecumseh, Mi
    Posts
    33

    Re: Patring out: 1990 Sundance 4 door

    PM sent!

  3. #3
    turbo addict
    Join Date
    Dec 2005
    Location
    Fayette City, Pennsylvania
    Posts
    1,943

    Re: Patring out: 1990 Sundance 4 door

    Short list of parts with prices:

    Front right fender - $35
    Hood - $30
    Engine/Trans - $250 (pick up only)
    Window fuzzies (rubber scrapers) - $50
    Tilt steering column - $60
    Tan seats - Offers
    Tan steering wheel - $25
    Tan dash board - $35
    Gauge cluster w/79k miles - $20

    ^^Prices are just there to appease the forum rules. Make an offer on anything.

    Anything you might need let me know. This is all going to the crusher this weekend!

  4. #4
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,469

    Re: Patring out: 1990 Sundance 4 door

    Manual mirrors? How about the piece that goes from the blend door to the HVAC control? If you have that I'll definitely take it. It needs to not be broken where it connects to the HVAC unit in the dash. That's the problem with mine. Shoot me a PM and we'll see if we can make a deal that gets some stuff out of your hair and makes the shipping on that cable really worth it for me.

  5. #5
    turbo addict moparzrule's Avatar
    Join Date
    Dec 2005
    Location
    Carlisle, PA
    Posts
    7,081

    Re: Patring out: 1990 Sundance 4 door

    Auto or manual trans? How many miles on it?

  6. #6
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,179

    Re: Patring out: 1990 Sundance 4 door

    front and rear bumpers/covers?

  7. #7
    turbo addict
    Join Date
    Dec 2005
    Location
    Fayette City, Pennsylvania
    Posts
    1,943

    Re: Patring out: 1990 Sundance 4 door

    Quote Originally Posted by cordes View Post
    Manual mirrors? How about the piece that goes from the blend door to the HVAC control? If you have that I'll definitely take it. It needs to not be broken where it connects to the HVAC unit in the dash. That's the problem with mine. Shoot me a PM and we'll see if we can make a deal that gets some stuff out of your hair and makes the shipping on that cable really worth it for me.
    Manual mirrors, yes. I think that only the passenger side one is good. Drivers side had a drywall screw drilled through the top of it to hold in place. Do you mean the multi-colored vacuum hoses? I can check on those for you.


    Quote Originally Posted by moparzrule View Post
    Auto or manual trans? How many miles on it?
    Automatic. Gauge cluster shows 79,xxx miles. The reason that the people stopped driving the car is because the brake lines rusted out. To my knowledge, the transmission was good. I drove it onto the trailer, and backed it off.

    Quote Originally Posted by 135sohc View Post
    front and rear bumpers/covers?
    Both in good condition.

  8. #8
    Garrett booster
    Join Date
    May 2009
    Location
    Pittsburgh PA
    Posts
    96

    Re: Patring out: 1990 Sundance 4 door

    looking for the header panel. located in Bethel Park, could pickup

  9. #9
    turbo addict
    Join Date
    Dec 2005
    Location
    Fayette City, Pennsylvania
    Posts
    1,943

    Re: Patring out: 1990 Sundance 4 door

    Header panel looks good. I'm actually checking it out right now. If you want it, I'll pull it and you can pick up. $30

  10. #10
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,469

    Re: Patring out: 1990 Sundance 4 door

    Not the colored vac lines, the piece that attaches to the blend door and then attaches to the arm on the HVAC control that slides between cool and hot. I need the black plastic trim piece that goes around the adjuster arm on the pass side mirror. Is that a tach cluster?

  11. #11
    turbo addict
    Join Date
    Dec 2005
    Location
    Fayette City, Pennsylvania
    Posts
    1,943

    Re: Patring out: 1990 Sundance 4 door

    I'll check that out for you tonight. I do believe that it is a tach cluster - I will confirm tonight after work.

  12. #12
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,179

    Re: Patring out: 1990 Sundance 4 door

    Thanks but never mind, I cannot make it up there this weekend

  13. #13
    turbo addict
    Join Date
    Dec 2005
    Location
    Fayette City, Pennsylvania
    Posts
    1,943

    Re: Patring out: 1990 Sundance 4 door

    Quote Originally Posted by 135sohc View Post
    Thanks but never mind, I cannot make it up there this weekend
    Pay me half in advanace, the remainder when you'd get here, and I can hold them for you.

  14. #14
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,469

    Re: Patring out: 1990 Sundance 4 door

    Any word on this?

  15. #15
    turbo addict
    Join Date
    Dec 2005
    Location
    Fayette City, Pennsylvania
    Posts
    1,943

    Re: Patring out: 1990 Sundance 4 door

    Didn't forget about you Cordes. Car is still sitting at the garage, just haven't gotten a chance to check yet. Been busy shipping out other parts etc, and you are next! The mirror piece you need is there and in good shape. And the cluster is a tach cluster.

    Pat

  16. #16
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,469

    Re: Patring out: 1990 Sundance 4 door

    Excellent!

  17. #17
    turbo addict
    Join Date
    Feb 2008
    Location
    york pa
    Posts
    1,813

    Re: Patring out: 1990 Sundance 4 door

    Still have the cluster?

  18. #18
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,469

    Re: Patring out: 1990 Sundance 4 door

    Quote Originally Posted by bgbmxer View Post
    Still have the cluster?
    What he said!

  19. #19
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,841

    Re: Patring out: 1990 Sundance 4 door

    did the car have bolt on wheel bearings?

    Brian

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  20. #20
    turbo addict
    Join Date
    Dec 2005
    Location
    Fayette City, Pennsylvania
    Posts
    1,943

    Re: Patring out: 1990 Sundance 4 door

    Quote Originally Posted by Aries_Turbo View Post
    did the car have bolt on wheel bearings?

    Brian

    I'll have to check.

Page 1 of 2 12 LastLast

Similar Threads

  1. General WTB front passenger door for 4 door 91' Sundance
    By SwinGenX in forum Parts Wanted
    Replies: 2
    Last Post: 10-21-2013, 01:25 AM
  2. Wanted 1990+ Shadow or Sundance
    By Sneke_Eyez in forum Cars
    Replies: 3
    Last Post: 02-28-2011, 02:48 PM
  3. For Sale 1990 Sundance RS Turbo
    By kdracer90 in forum Cars
    Replies: 5
    Last Post: 05-21-2010, 01:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •