Parting out a sundance I just brought home. 2.5 NA. Runs good, but underneath is rotted out. 4 door car. Anything you might need from it? Let me know. Car will be getting sent to the scrapper next Saturday.
Parting out a sundance I just brought home. 2.5 NA. Runs good, but underneath is rotted out. 4 door car. Anything you might need from it? Let me know. Car will be getting sent to the scrapper next Saturday.
PM sent!
Short list of parts with prices:
Front right fender - $35
Hood - $30
Engine/Trans - $250 (pick up only)
Window fuzzies (rubber scrapers) - $50
Tilt steering column - $60
Tan seats - Offers
Tan steering wheel - $25
Tan dash board - $35
Gauge cluster w/79k miles - $20
^^Prices are just there to appease the forum rules. Make an offer on anything.
Anything you might need let me know. This is all going to the crusher this weekend!
Manual mirrors? How about the piece that goes from the blend door to the HVAC control? If you have that I'll definitely take it. It needs to not be broken where it connects to the HVAC unit in the dash. That's the problem with mine. Shoot me a PM and we'll see if we can make a deal that gets some stuff out of your hair and makes the shipping on that cable really worth it for me.
Auto or manual trans? How many miles on it?
front and rear bumpers/covers?
Manual mirrors, yes. I think that only the passenger side one is good. Drivers side had a drywall screw drilled through the top of it to hold in place. Do you mean the multi-colored vacuum hoses? I can check on those for you.
Automatic. Gauge cluster shows 79,xxx miles. The reason that the people stopped driving the car is because the brake lines rusted out. To my knowledge, the transmission was good. I drove it onto the trailer, and backed it off.
Both in good condition.
looking for the header panel. located in Bethel Park, could pickup
Header panel looks good. I'm actually checking it out right now. If you want it, I'll pull it and you can pick up. $30
Not the colored vac lines, the piece that attaches to the blend door and then attaches to the arm on the HVAC control that slides between cool and hot. I need the black plastic trim piece that goes around the adjuster arm on the pass side mirror. Is that a tach cluster?
I'll check that out for you tonight. I do believe that it is a tach cluster - I will confirm tonight after work.
Thanks but never mind, I cannot make it up there this weekend
Any word on this?
Didn't forget about you Cordes. Car is still sitting at the garage, just haven't gotten a chance to check yet. Been busy shipping out other parts etc, and you are next! The mirror piece you need is there and in good shape. And the cluster is a tach cluster.
Pat
Excellent!
Still have the cluster?
did the car have bolt on wheel bearings?
Brian
Originally Posted by turbovanman