Ok, so what exactly was the lie? the word several? All you had to do sir, was respond what year and application when she asked and voila!, she would have given you the part #.
Instead of doing that you say that you were calling her bluff? what bluff? trying to find out what exact application you have, that's a bluff?
If you wanted all the part #'s and applications posted for the dodge community, then why not lead with that?
Your first 6 posts state that you are looking for the size for your car, which you never did post up what you had, which would have been very helpful from the start.
To me, the way this thread reads is that you needed a part # for your application and when you didn't get it immediately, you started blasting someone who was trying to help. I have found that direct ?'s with facts are much easier to weed through then all of this fluff and pissiness.
And at the end of the day, Cindy did post the part #'s for the belts anyway so why all this flaming?
Furthermore, the belts listed are not all necessarily going to work on all those applications. I have found that people change the size of the a/c pulley tensioner constantly, because most parts stores do not carry the correct size for every car and just hand out a generic size.
If you jump on rockauto right now they list 2 sizes for the same car,118mm and 95mm, so in truth, there are many more combination than the 2 that are listed, hence the word "several".
I have found people who are looking for help will usually provide more than enough info about their car then needed. You sir did not, plain and simple.