Looking for a single TIII connecting rod. pn# 4323958.
Just needs to be a good used one since I will be having them redone at a local machine shop with the other three I already have.
Looking for a single TIII connecting rod. pn# 4323958.
Just needs to be a good used one since I will be having them redone at a local machine shop with the other three I already have.
arent they the same as T2 rods?
I believe so, other than that the TIII supposedly came with higher quality rod bolts.
At any rate, I'm having a set of new ARP rod bolts installed, so a TII rod, or even a late model TI rod should work as long as it has the aforementioned part number cast into it.
Jeremy,
If possible try to find one that hasn't been reconditioned yet. Each time somebody reconditions them they lose about .003-4 in center to center distance. I probably have some laying around if no one wants to send one your way.
I would have them drill the small end of the rod while being reconditioned. They will also need to be weight balanced as Mopar had heavy and light batches.
Todd
Ill check my set, 87 t2 rods. Id prefer to sell the hole set, if you want them shoot me an offer i really dont need them. Untouched since i pulled them, have not been recon'd to my knowledge.
Thanks for the info Todd. The reason I asked for a "TIII rod" was because the set that I have came out of a '91 TIII originally. I figure if I can find another from that application it would be the best (crapshoot, I know). The reason I need another *one* is because when I tore apart the TIII that these came out of, it turned out it had three original rods (x958) and one early TI HD rod (x385) with a pressed pin!. As you know, the 385 is basically the same rod as the 958, but with a slightly different cap. I'm wanting to use this set of 958 rods, but obviously I would like to have a matched set for the TII build I'm working on.
Still looking out for one 958 rod that somebody has lying around. In the meantime I will try to find a scale and weigh the three I do have. (rods, caps, bolts, nuts, and floating bushing installed; but no rod bearing).
Come on, dood...stock rods? Throw some Ti rods in there and BE DA MAN!!!!
Simon doesnt have any he'd part with?
I've got plenty... call me I'll sell you 1 or 2 cheap!
FWD Performance is a performance shop with a significant investment in this market. We pride oursleves with a hard work ethic, friendly customer service, and honest business dealings with no hidden fees. FWD Performance, Real Race Products by Real Racers.
I got a couple 958 rods on the way, thanks Cindy.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info