Brought home my 3rd Tubo van

[Vigo]

So what's the overall setup in this thing? Still 1pc/mitsu?

[Sgt Craig]

So what's the overall setup in this thing? Still 1pc/mitsu?

T2 garrett with a clipped wheel,Stock shelby intercooler,2 piece thats mildly ported,FM slider cam)Stock head,Block is .020 over with Cast pistons,RFL,used 4 puck clutch/568,Stage 5 boost button cal,22psi,3 bar map,walbro 255,Front is lowered with shadow struts/springs,M/T 24.5x7x13 slicks on bogarts Shifter was stock with booger bushings on 13.9 pass now has a maddog sts.Its really mild.

[jefo]

How is the short throw? I want one, but don't want the knob to be any lower than it already is.

[Sgt Craig]

How is the short throw? I want one, but don't want the knob to be any lower than it already is.

Its great He put it together with a PT Rod and knob so it sits slightly about the seat/1.75ish taller than stock.

[Sgt Craig]

T2 garrett with a clipped wheel,Stock shelby intercooler,2 piece thats mildly ported,FM slider cam)Stock head,Block is .020 over with Cast pistons,RFL,used 4 puck clutch/568,Stage 5 boost button cal,22psi,3 bar map,walbro 255,Front is lowered with shadow struts/springs,M/T 24.5x7x13 slicks on bogarts Shifter was stock with booger bushings on 13.9 pass now has a maddog sts.Its really mild.

Forgot +40's too.

[Sgt Craig]

The new shifter.Still have to modify console to fit it.I also picked up some LED dash bulbs and going to try to rig up the CEL to something brighter and bettter location for knock.

[Sgt Craig]

[wheming]

Have been thinking the same thing with relocating the CEL. Don't have the van here to mess with it, but was thinking of trying to switch it to the other alert panel. Haven't done any leg work yet. Interested to see what you are thinking. There's always just running an aux warning light and tie into that circuit

[Sgt Craig]

Have been thinking the same thing with relocating the CEL. Don't have the van here to mess with it, but was thinking of trying to switch it to the other alert panel. Haven't done any leg work yet. Interested to see what you are thinking. There's always just running an aux warning light and tie into that circuit

im going to try to solder it to the board or use socket and spades to run it to my old shift light or other LED.I want it near eye level.

[Sgt Craig]

[wheming]

So what are we looking at here? A re-bulb with leds?

[Sgt Craig]

So what are we looking at here? A re-bulb with leds?

Yes once again for some reason my wording didnt show up.Ill work on hooking up CEl to old shift light in spring when i can get it out side and get door open all the way.Got the LED's off Ebay.less than $10 shipped for 20 of them.Had to bend the tabs a bit to get some of them to work.installed one in the HVAC panel too.

[wheming]

Oooh... which bulb size was the HVAC one?

[Sgt Craig]

Oooh... which bulb size was the HVAC one?

194 like the dash.Didnt do one in the headlight switch panel.i think its Easy enough the find the switch,lol.Im going to do the rest of the bulbs in van over the winter.

[Bardo]

Looks killer craig.

[Sgt Craig]

Scored some .020 venoila's on shot peened rods and arp bolts for $165 shipped off ebay.Pistons dont have any scuffing on them,no cracks around wrist pins.Ill need to find a bigger turbo now.Goal is 12's with the 5spd if it stays together.

[Sgt Craig]

Also did some mock up on the Rad/intercooler/Moving rad more center to the van and away from Alt.Mounting it will be pretty cool.Ill take some pics of it when i get it done.Intercooler is a porsche 944 intercooler I picked up at SDAC 24 for $50.it should work just fine,Still doing final fitment and figuring out mounting for it.

[Sgt Craig]

Also going to use a battery out of a Honda Fit.Its tiny weighs 22lbs and 330cca. Also received tach from pat.Check to make sure it worked.Factory tach is off about 800 rpm high.So I had been shifting the van a little early.

[wheming]

Nice. I'll have to check out one of those batteries. Still using the full-size one in Mini. And she could stand to lose a few pounds.... its part of her new year's resolution....

[Vigo]

Seems like a smoking deal on those pistons.