Boost, it's what's for dinner...
Turbo Mopar Staff
Join Date
Dec 2005
Location
Warsaw, NY
Posts
8,841
Re: MPScanDroid
Originally Posted by wowzer
brian, when the newest version of mpscandroid is installed -
1)are you able to retrieve the mpscilink version from the menu and what does it say?
2)what does the "about mpscandroid" return for a value?
3)from the misc/nextion tasks/module settings menu what values are returned?
i assume you are connected to a smec t1 ecu in a running vehicle?
i just loaded the mpc files you sent me a couple weeks ago and was able to log (i used ksmec1) without a hickup. i first logged from mpscandroid then did a monitor from the mpscilink device.
i used a samsung s7 (os 8.0.0) as well as an old nexus 10 (os 5.1.1)
1. I did it earlier today but I forget. I'll do it again tomorrow.
2. 2.0.1.0
3. Bluetooth baud 57600
Nextion available: True
ECU port ready: True
SD card available: True
Nextion baudrate: 115200
Yes smec t1 in my reliant.
Thx,
Brian
Originally Posted by turbovanman
This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.