Page 16 of 16 FirstFirst ... 61213141516
Results 301 to 308 of 308

Thread: MPScanDroid

  1. #301
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,295

    Re: MPScanDroid

    Quote Originally Posted by wowzer View Post
    brian, when the newest version of mpscandroid is installed -
    1)are you able to retrieve the mpscilink version from the menu and what does it say?
    2)what does the "about mpscandroid" return for a value?
    3)from the misc/nextion tasks/module settings menu what values are returned?

    i assume you are connected to a smec t1 ecu in a running vehicle?

    i just loaded the mpc files you sent me a couple weeks ago and was able to log (i used ksmec1) without a hickup. i first logged from mpscandroid then did a monitor from the mpscilink device.

    i used a samsung s7 (os 8.0.0) as well as an old nexus 10 (os 5.1.1)
    1. I did it earlier today but I forget. I'll do it again tomorrow.
    2. 2.0.1.0
    3. Bluetooth baud 57600
    Nextion available: True
    ECU port ready: True
    SD card available: True
    Nextion baudrate: 115200

    Yes smec t1 in my reliant.

    Thx,

    Brian

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  2. #302
    Supporting Member II Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    1,929

    Re: MPScanDroid

    hmm, doesn't make sense. you are able to communicate ok with the device and the values look correct, especially the baud rates. i would have thought that you had the tx/rx lines switched but since you can log with the device on its own you obviously don't. so, i'm stumped. all the phone does is send the gauge info to the device (which appears to have been successful based on the stand alone logging) and then sends a command to start logging and periodically sends a command to retrieve the logged values. in mpscandroid, what do you have for program settings for the default ecu, default bin size, connection type, logging rate, ecu timeout rate, and analog logging rate? are you able to upload log files using mpscandroid from the device using the "device sdcard" menu?
    89 Voyager LE, 2.5T2 - rest in peace
    87 Charger Shelby T2 (2.4 conversion in process)

  3. #303
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,295

    Re: MPScanDroid

    well its working now.... here is what i did.

    i loaded up mptune last night and shut it down and it updated.

    then i took my laptop to the car and plugged into the arduino and flashed the arduino.

    then i fired the car up and the latest app on my phone now works.

    so i updated my 2015 fire 7 (rooted/bootloader hacked running CM/lineage 12.1) to the latest mpscandroid and its working as well.

    now wayne said he was testing his v2.0 and it wasnt logging for him now with the latest version of mpscandroid just like mine wasnt.

    mpscilink version is now 1.0.1.9. i think it was something like 1.0.0.1 before.

    hopefully wayne can get his working cause for this to be an intermittent problem would be annoying to troubleshoot.

    Brian
    Last edited by Aries_Turbo; 06-12-2019 at 11:33 PM.

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  4. #304
    Supporting Member II Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    1,929

    Re: MPScanDroid

    1 down, 1 to go. great news btw. just weird.
    89 Voyager LE, 2.5T2 - rest in peace
    87 Charger Shelby T2 (2.4 conversion in process)

  5. #305
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,295

    Re: MPScanDroid

    Yeah it's been strange.

    Now to be a pest lol. Can you change the logging/profile select/sample counter bar to be smaller or on the side or location selectable?

    Also is there a way to make the nextion logging font to be the same as the button font on the main screen?

    Just wondering if that's doable without too much hassle.

    Brian

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  6. #306
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    4,359

    Re: MPScanDroid

    Quote Originally Posted by Aries_Turbo View Post
    well its working now.... here is what i did.

    i loaded up mptune last night and shut it down and it updated.

    then i took my laptop to the car and plugged into the arduino and flashed the arduino.

    then i fired the car up and the latest app on my phone now works.

    so i updated my 2015 fire 7 (rooted/bootloader hacked running CM/lineage 12.1) to the latest mpscandroid and its working as well.

    now wayne said he was testing his v2.0 and it wasnt logging for him now with the latest version of mpscandroid just like mine wasnt.

    mpscilink version is now 1.0.1.9. i think it was something like 1.0.0.1 before.

    hopefully wayne can get his working cause for this to be an intermittent problem would be annoying to troubleshoot.

    Brian
    So to sum up,...
    You fixed yours, and you broke mine?.. lol

    Sent from my SM-T380 using Tapatalk
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.7786@113.04 mph! - Jan 15th, 2017 Fayetteville Dragway, NC)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  7. #307
    Boost, it's what's for dinner... Turbo Mopar Staff Aries_Turbo's Avatar
    Join Date
    Dec 2005
    Location
    Warsaw, NY
    Posts
    8,295

    Re: MPScanDroid

    Yes lol😄 sorry wayne

    Quote Originally Posted by turbovanman
    This one is easy, I have myself to blame, I rush things, don't pay attention to gauges when I should, change to much stuff at once then expect miracles, the list is endless.

  8. #308
    Supporting Member II Turbo Mopar Contributor
    Join Date
    Jun 2006
    Location
    Spearfish SD
    Posts
    1,929

    Re: MPScanDroid

    posted a new version of mpscandroid. this fixes a stubborn bug that primarily affected older phones/tablets. everybody should update to this new version (2.0.1.1).
    89 Voyager LE, 2.5T2 - rest in peace
    87 Charger Shelby T2 (2.4 conversion in process)

Page 16 of 16 FirstFirst ... 61213141516

Similar Threads

  1. MPScanDroid
    By wowzer in forum EFI Tuning
    Replies: 9
    Last Post: 11-25-2015, 11:39 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •