Part numbers and parts that fit the Consulier

[Johnny]

That's what I put on mine last year. Forgot to record the info.

[Johnny]

Locking gas cap.
Might be Stant or Robertshaw brand
#10589 or G-789

Confirmed, these fit.

[Johnny]

Better lighting options for the brake light.

Philips (12899RX2) Red P21/5W LED Exterior Bulb - in place of the 1157 rear bulb

You will need to use this flasher.....

Tridon EL12 Flasher

[player1up]

FYI, Looks like the "DD" prefix for the A/C parts on the list is for Danhard Inc. http://www.danhard.com/
They still use some of the same part numbers AND they still sell the stuff!!


I had my accelerator pedal break a couple of days ago. The parts list only specifies GM pedal w/ extras.
It's a Fiero pedal and "the Fiero store" sells them with the spring for $6 Part # 50160 ACCEL

[Johnny]

REAR of car tie rod ends.
The inner is ES2133L, got one at AutoZone for $9.99. It fits a 1984 Mazda GLC.
The outer tie rod looks to be the same as a late 80's Daytona, etc....but have not replaced it to be sure.

[Johnny]

Series one wiper blade arm....
"its a 1983-91 bmw e30 wiper arm. The part number on the inside of the plastic bolt cover is 190888 and has a logo SWF.
The one on my car has a casting mark from '87".

player1up

[Thrillz]

If you're looking for parts for the rear fiero brakes I just found a site that you can get anything you need.

www.fierostore.com

[Johnny]

Great place to get parts. When I needed mine, my local NAPA got them for me....but that was 4 years ago.

[player1up]

oops double post for the accelerator pedal, forgot I already posted it

[Johnny]

WATER HOSE
the larger hose that connects to the water pump, that heads toward the rear of the car.
Found the NAPA hose #9124 works great. It needs cut to a shorter length.