09/02/2013
Username: SLM90VNT
Scottie Meade
Gates, NC 27937
scottiem757@aol.com
I have for sale many parts from my 89 Daytona drag car..
1. A-413 Tranny with Peliquin differential, Billet A-904 input shaft from FWD Motion with special order Frank Lupo race converter to match. Converter only has 10-12 passes on it. Reverse manual valve body. $2400 just in custom parts. Will not separate tranny from converter because they are both 904 splined. Would recommend fresh clutches before use. A true bulletproof tranny!! - SOLD
2. Complete SDS EM3 stand alone system with wiring , underdrive pulley and 3 bar map. - $700
3. Complete running 1990 common block 2.2 T-IV motor with super 60 injectors. Still attached to above tranny. Balance shafts removed. Running a cast crank. - $900
4. Complete non-common short block 2.2, machined and ready for assembly with Ross forged pistons, Turbo II rods and Clevite 77 bearings. - $800
5. Bare non-common block. - $100
6. Mystery non-common short block that came with the car. It is complete just no info on it. Appears to have forged pistons. - $300
7. Turbo to side exit exhaust, behind front wheels, 3" - $75
8. EFI axles - $75
9. 24.5in M/T slicks on crab wheels - $150 for the pair
10. Morosso DS-2 skinnies. 24x5 on crab wheels - $75 for the pair
1, 2 & 3 above combined were in the car and had a best of 7.88 in the 1/8 mile with 1.22 transfer gears on a 50 degree night@ 21psi. It now has stock turbo van gears and ran mid 8.20s in the 1/8th on a mid 90 degree day @ 21 psi.
Prices are pretty firm but feel free to make your best offer.. especially on the whole lot!! LOL
Would like all to be picked up, stuff is too big to mess with shipping. Located in Gates, NC 27937.