I've been trying to buy 10mm head bolts and no one sells them with the washers. Does anyone know of a source for these. I don't have old 10mm head bolts to get the washers from.Thanks,Frank
I've been trying to buy 10mm head bolts and no one sells them with the washers. Does anyone know of a source for these. I don't have old 10mm head bolts to get the washers from.Thanks,Frank
Have you tried our vendors? FWD Performance? Turbosunleashed?
The MP 11mm bolts come with extra washers that should work OK.
JT
SDAC Director
SDAC-Chicago President
JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
87 Shelby Z - 10.50@141.66mph
87 CSX #751 Clone - 12.88@102.88mph
www.badassperformance.com
Check out Turbo-Mopar Times!
Submit your 1/4 mile times HERE!!
Support SDAC! Join Today!
"I'm not some pro athlete with a bajillion dollars, I'm just an every man"
Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
Thanks for the heads up on the washers.I have lots of 11mm head bolt washers. Wasn't sure if they would work or not. I didn't try our vendors because the garage wants the car out. They have work backing up and the engine is being done as a favor.
Try Ebay. Search for headbolts for 85 or 85 2.2. some as low as $10.
Todd
If you need washers you can have mine from my head. I should still have all 10
Can you re-use old washers?
If the surface where the underside of the bolt head turns on the washer is smooth then I would reuse them.
Posting Permissions
Reply With Quote
