2 indy coolers, one new.Originally Posted by BOOSTIFIED
2 indy coolers, one new.
Working on clearing the decks.
You still have the bare ported head and a VNT SBEC?
Someone is waiting for a shipping quote on the head and the SBEC is socketed and I can put any calibration you like on it.
Working on clearing the decks.
Some parts from a friend of mine- All are new and someone has interest in the AFR. The Turbonetics turbo is a hybrid with a Mopar .63 housing with what looks to be a stage 2 wheel, the intake side is a T4 with a 40 or 50 trim wheel, I'll try to look up the specs.
He purchased then a decade ago and they have just been sitting on a shelf gathering dust. Make an offer and I'll pass it along and see if he states yes/no.
The BOV I don't have any info on, assume he picked it up off Ebay. Looks like an import.
There are a few people I have to answer in this thread and then I'm going to start a fresh sale listing since the GLHS is getting parted out. Thanks!
Gary
Working on clearing the decks.
don't forget about me and that cooler..
Last photos of this thread.
Turbo is a stocker, no cracks or broken bolts $50 (there is an interested party at the moment)
The SBEC is a socketed board which was a backup I carried in the trunk of my SOHC 1991 R/T as a backup in case of breakdown on the road. It never did but carrying a spare never bothered me. It does NOT come with the calibration shown (8th version sub-revison F in case you were wondering), I will however burn any cal provided onto a chip for you or a stock calibration.
I'm going to go through the barn today with the scanner and power supply to identify what SMEC/SBEC I have on the shelf and will post the numbers.
Working on clearing the decks.
Power Modules
5226766 x4
5257808 x2
Both part numbers listed for turbo applications.
SMEC/SBEC
5234553 Powers up, no ID on scanner. 1988?
5233982 Turbo I automatic 1988
5235135 2.5 Turbo I auto 1989
5235069 2.2L TURBO II 1989 x2
5233982 1988 TI A/T
4557589 1990? No ID
5235193 2.5 manual TBI 1991
56028349 Ram truck 5.9 1995
4672246 Mexico 2.5 Turbo II manual 92-95
5235285 2.5 turbo auto 1989
5235139 Turbo I automatic minivan 1989 x5
1988 Turbo II SMEC
1989 Turbo Mini Auto SMEC
1989 2.5 Turbo Auto SMEC FED
4639554 2.5 TBI manual 1993
5276415 Turbo IV VNT 1990
4686596 Turbo IV VNT 1990
5235289 2.5 Turbo manual SBEC
5235477 2.5 Turbo auto SBEC 1991
1989 2.5 Turbo I minivan with manual trans
4714209 2.5 TBI Auto 1993
5235093 1989 3.0 V6 Automatic
Socketed 90-91 Turbo SBEC x4
Working on clearing the decks.
What do you want for a SBEC?
What do you want for the Mexican SBECII?
I have a 1993 2.5 TII bin file if that is all you require, I have a few people inquire on the module itself already.
This module is unmolested, not sure where the other went.
Working on clearing the decks.
I have the bin file already. Mostly just interested in the SBECII itself.
Its the same hardware as a US spec SBECII.
Gary, I PM'd you about the RT SBEC this morning but I'm not sure it went thru because I sent it from my phone. DO you have a TIII/RT SBEC for sale, socketed no less? I posted a wanted add last week for the very same item...
ShellGame, will a 91 RT SBEC run a 93 IROC RT (that has had the alarm module deactivated by Jackson's swithcheroo while running technique)??
AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
It will probably run. But there will be some funkiness. Cruise won't work and you'll have a code for ASD. Unless you move a wire (at least).
FWIW, I can also reset the alarm bits on any SBEC. I can even send you a chip that does it, if you don't want to send in your SBEC.
You know I just might have the module I pulled the '93 chip from, I do have 4 sockected SBEC's. I'll have to look close at the 4 and see if one is different from the rest.
Anything I should look for aside from the PN if still there?
- - - Updated - - -
No Turbo III modules.
I did just give one back to John Fleck at SDAC-25, drop him a note and see if its available.
Working on clearing the decks.
Yes I know I was going to post a new thread, little busy.
I have 3x 52 mm throttle bodies, $40 a pop fair? if not throw an offer at me.
16" new tires, $100 for all three.
$40 for a pair of 89+ shadow tail lamps.
$230 for a 2-piece intake unmolested with rail, injectors, TB and bolts.
88-91 Turbo I or II intakes, $50 a pop.
Last edited by mopar-tech; 08-12-2015 at 05:23 PM.
Working on clearing the decks.
If you pull it out of the case, you can tell the difference in the traces on the back of the board (you should be able to see thru the potting on the back of the board, it won't have aged like the front). The SBECII is very different.
I do indeed have the second module, pictures to follow.
Working on clearing the decks.
I'm such a dunce some days, I even had the case labeled.
1993 MEX module on the bottom, 1990-1991 FED on the top.
Working on clearing the decks.
Gary,
Yes I know I was going to post a new thread, little busy.
17" new tires, $100 for all three
Tires in pic are 16"
Mark
Fixed.
Working on clearing the decks.
Posting Permissions
Reply With Quote