Note sure you can make it out in the picture but its the standard turbo port on the intake with the floor untouched.Originally Posted by nvysion
Note sure you can make it out in the picture but its the standard turbo port on the intake with the floor untouched.
Working on clearing the decks.
OK thanks
I understood it was gasket matched with the intake/exhaust gasket, so it would have been good for a 655 head.
1) The top and bottom are gasket matched, the ports have some cleanup and it is ported for 52 mm throttle body.
2) The intake ports are cleaned up for 287/782/445 heads which are "D" shaped, 665 is an early oval port.
You can port the intake to match the 665 head if you desire.
Working on clearing the decks.
ok if you'd sell the wheels shoot me a price, also have a nice set of 15" turbo blade wheels from a spirit if your interested in trade
Phew quite a thread, looking through I seen mention of 89 Daytona Shelby front brakes. I am looking for a a set of knuckles, if you do, i'd be interested if you will ship to Canada. Thanks!
ZF pump one is on its way to NJ
9114 9999 4431 4557 5541 81
I do indeed have a second pump for anyone looking.
I don't mind shipping to Canada but doubt it would be cheap.
Working on clearing the decks.
Small spline is 18 spline right? How much for the disc?
Updated the first post a bit with info and pictures.
Working on clearing the decks.
Interested; total with Shipping to 48189?Bare ported head $40
How much are you asking for the LM's, SMEC's and SBEC's? I'm not really short on cores right now, but it's hard to pass up a lot that size.
I'm prepared for that, if you do have 89 Daytona Shelby knuckles i'd be interested in how much, thanks!
I'll try to work up a shipping quote on head and knuckles before the weekend, CSX is still putting up a fuss.
Turbo II intake is sold.
Working on clearing the decks.
Looking for a one piece gasket valve cover with no damage. No problem if it needs paint. Let me know. Thanks
Going to be at SDAC? $20
Working on clearing the decks.
Gry - Any chance you have some of the early 2.2 main bolts that had the 6mm threaded end for the oil pickup? I need 3-4 extra ones to try and mount a windage tray for my GLH...
Very doubtful, I can look though.
Working on clearing the decks.
Have any calipers for my 87 CSX? Thanks.
No calipers.
Working on clearing the decks.
They the same as an 87 Daytona Pacifica?
Rears should be a no (87 Daytona uses funky lever in caliper pushing on pad setup) 87 CSX uses caliper and shoe setup.
Front calipers should be dime a dozen. Just need to get the brand name off the casting. K-H is one, can't recall the other that starts with an A.
Working on clearing the decks.
any indy coolers or coolers for an L body?
Posting Permissions
Reply With Quote