OK thanks
I understood it was gasket matched with the intake/exhaust gasket, so it would have been good for a 655 head.
1) The top and bottom are gasket matched, the ports have some cleanup and it is ported for 52 mm throttle body.
2) The intake ports are cleaned up for 287/782/445 heads which are "D" shaped, 665 is an early oval port.
You can port the intake to match the 665 head if you desire.
Working on clearing the decks.
ok if you'd sell the wheels shoot me a price, also have a nice set of 15" turbo blade wheels from a spirit if your interested in trade
Phew quite a thread, looking through I seen mention of 89 Daytona Shelby front brakes. I am looking for a a set of knuckles, if you do, i'd be interested if you will ship to Canada. Thanks!
ZF pump one is on its way to NJ
9114 9999 4431 4557 5541 81
I do indeed have a second pump for anyone looking.
I don't mind shipping to Canada but doubt it would be cheap.
Working on clearing the decks.
Updated the first post a bit with info and pictures.
Working on clearing the decks.
Interested; total with Shipping to 48189?Bare ported head $40
How much are you asking for the LM's, SMEC's and SBEC's? I'm not really short on cores right now, but it's hard to pass up a lot that size .
I'll try to work up a shipping quote on head and knuckles before the weekend, CSX is still putting up a fuss.
Turbo II intake is sold.
Working on clearing the decks.
Looking for a one piece gasket valve cover with no damage. No problem if it needs paint. Let me know. Thanks
Gry - Any chance you have some of the early 2.2 main bolts that had the 6mm threaded end for the oil pickup? I need 3-4 extra ones to try and mount a windage tray for my GLH...
Have any calipers for my 87 CSX? Thanks.
Working on clearing the decks.
any indy coolers or coolers for an L body?