Made the trip home from Northern California with little drama, here is the travel thread:
http://www.turbo-mopar.com/forums/sh...rip&highlight=
Now through safety, and on we go. All it needed was an inner and outer tie rod on one side. Here is the car:
I need to get rid of the wire wheel covers soon. I like the GTC mesh wheels, and found these on line which I really like. They are Enkei 92s and come in 15 inch diameter 4x100 or 5x114.3, either 7 or 8 inches wide:
The wagon is 4x100 right now, I figured it would be 5x100 but it ain't. I have the rear solid discs off of a 91 shadow es and access to the full K frame off of an 89 LeBaron GTS (stamped dual pivot). I also have a set of 16 inch pumpers with nearly new tires which I could use. But, that is all 5x100. I'd like to improve the brakes but staying with the 4 bold hubs will make that more difficult. I could do LHS brakes to change things to 5x114.3. I would like to eventually make this into a comfy cruiser that can hold it's own at the drag strip.
Thoughts?
Martin