So I've finally got my motor together in my 92 Spirit ES.
1987 T2 block -fresh rebiuild
92 stock wiring harness/top end/T03 with T2 setup
No codes are stored - just 12 and 37 [Battery and barro thing]
I can't get spark! Timing is fine[checked many many times]
I can hear the fuel pump prime when I first turn the key so I know the ASD is working, there's fuel pressure when I crank so I know the pump ir working
I've tried 4 HEPs so I know they're fine[plus I get power to + of the coil
The neg, I get solid power to the coil as well, even when cranking. I'm told by a good source that is there's solid power to the neg of coil while cranking then my coil control circuit is toast, and should throw a code 43, though I get no code.
I recently hooked up an LED light to the neg of the coil and cranked again. I made a video but I think it's kind of useless but with the LEDs plugged in there IS a definite mild flicker as it cranks like it should. Should the flicker be more definite so you can see it clear as day or should it be just mild?
I have replaced the coil as well, no change.
Does anyone have any ideas? Is my coil control curcuit really toasted and I need a new 92 T1 computer?
Here's the video of my crank with light hooked up to neg wire on the coil. Poor quality so you can't really see the flicker.
http://www.youtube.com/watch?v=f1LLZn5bfgU