Johnny, if you could please, get a price for a second cover to be produced. I am certainly interested, however my timeline is a lot further out than yours.
Johnny, if you could please, get a price for a second cover to be produced. I am certainly interested, however my timeline is a lot further out than yours.
Chris Wright www.TurbosUnleashed.com Chris@TurbosUnleashed.com 602-76-BOOST Tech/Sales#: Monday-Saturday 9AM-7PM MST Proudly Serving the Turbo-Mopar Community since 1997 TU is a performance, not marketing company. We provide accurate performance data on all our performance products. Fabricating data to make us appear better is just not our style. Do the research before you buy. ROCK BOTTOM PRICES WITHOUT THE HIDDEN HANDLING FEES.... -----HOME OF THE 9 SECOND FWD T-M CLUTCH-----
Dave,
I am having mine made without the louvers. I want to build mine with
a squareish hole there above the engine. Then I am going to have a
polished stainless trim and mesh covering the hole. So you can see
into the engine compartment and also lets air flow.
You interested?
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
The mold for my engine cover has been started. No louvers in the new one.
Last edited by Johnny; 02-05-2015 at 01:33 AM.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Built this engine for my GLHS, but decided its been on the shelf long enough.
Its going to get finished and put in the GTP....along with a new clutch and trans with a Quaife limited slip.
http://i1312.photobucket.com/albums/...ps12607bba.jpg
http://
Last edited by Johnny; 02-06-2015 at 12:27 AM.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Any plans for a spoiler yet? I grabbed one for my car when at rossin but it's one of the shorter ones and won't work for my car so I'm going to need one. I'm guessing your car will require the longer spoiler as well. If I get ambitious this summer I may look into making one but it would be nice to find someone that would possibly allow theirs to be dupilcated.
I have a spoiler also, but it won't fit my car.
The metal one I made is okay for not, but would like the correct one some day...or one close to it.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Engine cover progress looks good Johnny!
On the spoiler note, I picked one up while at the shop in October. It fits correctly on both targa and hardtop bodies that I have. It's currently being copied, I wonder how different your targa could be from mine.
If it fits mine, I would want/buy one. You interested in a engine cover with out lovers?
- - - Updated - - -
Yes sticking with 8v, sticking with what I know. Sticking with what I have.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
I you look at these two side by side you can see how much longer the spoiler on the green car is compared to the white one. What I see with my car is the wing would fit but the radiator slot is farther forward or the car is longer because the spoiler does not cover the radiator. I have the spoiler that the white car has on it. I'd need one like the green car has.
I need one like the green cars also. And it doesn't have the third brake light.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Hmmm.... mine is very similar to the white one, but without the 3rd brake light. I think it might wrap over top of the 1/4 panels more than these two pictured. Additionally, I don't have a radiator to confirm fitment. Definitely interesting.
Another note about mine is the under side has " race car #20 " written on it. Maybe dig up some racing pictures?
Oh! And Johnny, I think a hole instead of louvers would be fine. Might be interested in adding a series 2 style scoop on top. We'll see.
I bought these 8-6-13 for my Consulier.
205-50-15 front
225-50-15 rear
Falken ziex ze912
Here it is not that many months later and I stopped by the tire store with a slow leak.
they fixed it, but these tires are shot. And they had nothing to replace them with.
i looked on line tonight, the 225 is imposible to find, the 205 size is easy to find.
what to do? Only tire this size is race tires. Don't think I want to use them to
go from west coast to east coast and back this summer.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
How many miles did you get out of them?
Wayne H.
'91 Dodge Spirit ES 2.5L turbo 5spd
'05 PT GT 2.4T HO autostick (RIP)
'89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
'89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
and other cars, trucks and motorcycles
https://www.youtube.com/user/SlugmobileMeanMini
what size is the rim?
R1R toyos come in 225/45-15 and would last long enough I think. They say 200 treadwear now.. used to be 140. They also have a 205/50-15 for matching R1R fronts.
Or maybe just do 205/50-15 all the way around for something longer lasting. I don't think 205 all around would necessarily be a bad thing.
http://www.tirerack.com/tires/tires....PR1R&tab=Sizes
http://www.tirerack.com/tires/tires....1RV2&tab=Sizes
Yes, those are on my list to look at tomorrow.R1R toyos come in 225/45-15
- - - Updated - - -
R1R toyos come in 225/45-15
225's, I'd like as wide as I can on the back.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
KUMHO ECSTA AST 225/50R R15 TIRES
Looks like Discount tire and America's Tire has these.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com