1. The old Bilstien shock and the new QA1 adjustable shock.
2. I came with a type of rod end that needed to be installed.
3. Just add one clip, press in the rod-end, add the other clip.
4. This is what it looks like installed. Showing the adjusting knob.
5. The parts that came in the box.
6. Had to squeeze the spring just a little to get the top hat installed.
7. Top hat in and ready to put in the car.
8. Had to shorten the spacers as the "rod-end' in the new shocks was wider.
9. How the spacers work with the shock.
All installed and spring height adjusted.
These do seem right and room for movement without bottoming out.
Can't do a test drive yet, my radiator fill box is not ready yet.
While pushing down on the car to settle it so I could take measurements it felt real soft.
"OH YEAH" these are adjustable in 18 positions. I turned them to 13 and seems too hard.
I'll get to play with it soon.
These were purchased from Summit,
part number HAL-DS401.