Results 1 to 4 of 4

Thread: Chrysler Daytona idle waves

  1. #1
    Mitsu booster
    Join Date
    Jul 2013
    Location
    Finland
    Posts
    1

    Chrysler Daytona idle waves

    Hello, first, sorry for my bad english, i'm from finland.

    So, i have a 92 daytona, with 2.5 turbocharged engine. problem is that the idle is waving so hard that whole car is shaking, when i throttle it works okay.

    i have done a cylinder head, with valves, sparkplugs and wires, idle air control valve, rotor and distributor cap. I have check all hoses and gaskets, no air leaks. could it be the map sensor?

    And second..pcv valve hose smokes when engine warms up. i mean that hose that goes to airfilterbox..is this normal..?

    Thanks very much, i hope that somebody could help me.

  2. #2
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,559

    Re: Chrysler Daytona idle waves

    Have you set the distributor to 12 degrees?
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

  3. #3
    Rhymes with tortoise. Turbo Mopar Staff cordes's Avatar
    Join Date
    Dec 2005
    Location
    Tuscola, IL
    Posts
    21,465

    Re: Chrysler Daytona idle waves

    Any codes?

  4. #4
    Mitsu booster
    Join Date
    Jun 2013
    Location
    minnesota
    Posts
    3

    Re: Chrysler Daytona idle waves

    Quote Originally Posted by razorth View Post
    Hello, first, sorry for my bad english, i'm from finland.

    So, i have a 92 daytona, with 2.5 turbocharged engine. problem is that the idle is waving so hard that whole car is shaking, when i throttle it works okay.

    i have done a cylinder head, with valves, sparkplugs and wires, idle air control valve, rotor and distributor cap. I have check all hoses and gaskets, no air leaks. could it be the map sensor?

    And second..pcv valve hose smokes when engine warms up. i mean that hose that goes to airfilterbox..is this normal..?

    Thanks very much, i hope that somebody could help me.

    I just went thru this yesterday with my 91... i back probed my iac to find the voltage was all over the place(no code since the smec has no idea where the iac is actually running). Ended up being the weather pack plug was not making good contact even though it was plugged correctly. Also i would check to make sure your pvc valve is operating correctly and make sure it has no leaks elsewhere(hoses).

Similar Threads

  1. Chrysler 3.8L V6 in Daytona
    By Daytana in forum The Original "Turbo Dodge" Cars
    Replies: 235
    Last Post: 08-29-2013, 12:47 PM
  2. 87 daytona shelby z high Idle.
    By shackwrrr in forum "I need help!"
    Replies: 2
    Last Post: 11-02-2010, 01:48 AM
  3. Chrysler Daytona #s?
    By rampant150 in forum The Original "Turbo Dodge" Cars
    Replies: 0
    Last Post: 12-22-2009, 04:05 PM
  4. 87 Daytona Pacifica has terrible idle when cold
    By 340727dart in forum "I need help!"
    Replies: 1
    Last Post: 11-09-2007, 10:40 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •