Results 1 to 10 of 10

Thread: Gas in oil, burnin oil but not in cylinders or breather. Ideas?

  1. #1
    Mitsu booster
    Join Date
    Jun 2013
    Location
    Corunna, IN
    Posts
    34

    Gas in oil, burnin oil but not in cylinders or breather. Ideas?

    I'm getting gas in my oil. Car runs fine, but thins the oil out TERRIBLY (Its almost like 2 cyl oil after driving it 130 miles). It also is burning oil. I'm not getting any in the cylinders or the breather, but it smokes worse than a forest fire. anyone have any ideas?

  2. #2

    Re: Gas in oil, burnin oil but not in cylinders or breather. Ideas?

    Turbo..oil is pretty thin once hot. Does it go away during acceleration/driving down the road?

  3. #3
    Mitsu booster
    Join Date
    Jun 2013
    Location
    Corunna, IN
    Posts
    34

    Re: Gas in oil, burnin oil but not in cylinders or breather. Ideas?

    It does get a little thicker when cold but strongly smells like gas. It only appears to smoke when on decel or at a warm idle. Was thinking the o-rings on the injectors are bad and the exhaust seal on the turbo was leaking to make it smoke. your thoughts, Trannybuster? (or anyone else)

  4. #4

    Re: Gas in oil, burnin oil but not in cylinders or breather. Ideas?

    Turbo....to burn that much oil in cylinders would cause plug fouling and other issues.

  5. #5
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,352

    Re: Gas in oil, burnin oil but not in cylinders or breather. Ideas?

    Have you done a compressor test? Sounds like your motor is toasted.

  6. #6
    Mitsu booster
    Join Date
    Jun 2013
    Location
    Corunna, IN
    Posts
    34

    Re: Gas in oil, burnin oil but not in cylinders or breather. Ideas?

    the plugs get a little soot on them but they don't foul. Was planning to take it to New Castle, IN this coming weekend and hopefully sell it. I had an 85 YEARS AGO that I loved, but the previous owner cobbled this one too much for me to fix, I think. I know I could get a new turbo, but I'm affraid that won't fix it. plus I want one that still has the 5spd rather than the A413. I wanted to have this as a toy, but I'm not sure what else needs straightened out on it. been a real heart-breaker for me

    - - - Updated - - -

    compression is fine.

  7. #7
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Gas in oil, burnin oil but not in cylinders or breather. Ideas?

    What is the compression? Do a leakdown test. Pics of the plugs? Do you have an AF gauge or wideband?
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  8. #8
    Mitsu booster
    Join Date
    Jun 2013
    Location
    Corunna, IN
    Posts
    34

    Re: Gas in oil, burnin oil but not in cylinders or breather. Ideas?

    found out the problem is a bad intake gasket. solution is that I hope to be selling it this weekend to a guy in New Castle IN

  9. #9
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Gas in oil, burnin oil but not in cylinders or breather. Ideas?

    Wonder what his name is?
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  10. #10
    turbo addict
    Join Date
    Apr 2009
    Location
    Detroit, MI
    Posts
    1,770

    Re: Gas in oil, burnin oil but not in cylinders or breather. Ideas?

    Quote Originally Posted by turbovanmanČ View Post
    Wonder what his name is?
    I thought the same thing lol
    [SIGPIC][/SIGPIC]

Similar Threads

  1. Getting excessive oil into all cylinders
    By TJ Schulze in forum "I need help!"
    Replies: 25
    Last Post: 04-30-2013, 09:16 PM
  2. Replies: 25
    Last Post: 08-17-2011, 12:58 AM
  3. oil breather filter 2.2t2
    By errol in forum The Original "Turbo Dodge" Cars
    Replies: 6
    Last Post: 08-08-2011, 08:09 PM
  4. oil smells like gas
    By jackerman in forum "I need help!"
    Replies: 10
    Last Post: 03-20-2011, 12:17 PM
  5. help? oil in cylinders
    By wasp in forum SRT-4 Neon & PT Cruiser
    Replies: 11
    Last Post: 07-21-2009, 02:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •