Results 1 to 11 of 11

Thread: A-413 w/ welded bands

  1. #1
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,559

    A-413 w/ welded bands

    Date: 23rd June 2013
    Username: Force Fed Mopar
    Full Name: Rob Mercer
    City, State, Zip: 29322
    Contact: Here or call/text 864-347-7951
    Price: $50

    Description:

    Got this trans with a car I bought sold, not an auto guy so need it gone. Bands have been welded (Racer Steve mod?), Maybe some other stuff. Supposed to be a good trans I just don't have a use for it. Would prefer local pickup but can deliver within 100 miles for a fee, or ship if you want to pay for that. I will get a pic of it today. Thedon809 may have more info on it, I got it from him.
    Last edited by Force Fed Mopar; 06-24-2013 at 03:33 AM.
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

  2. #2
    Visit www.boostbutton.com... Turbo Mopar Contributor ShelGame's Avatar
    Join Date
    Dec 2005
    Location
    Whitmore Lake, Michigan, Unite
    Posts
    9,918

    Re: A-413 w/ welded bands

    Good deal, too bad you're too far away...
    https://db.tt/SV7ONZpQ
    Rob Lloyd
    '89 Daytona C/S

    2.5 T1 Auto
    13.24 @ 100.5mph
    NHRA #3728 AF/S

    boostbutton.com
    tuning wiki

  3. #3
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: A-413 w/ welded bands

    I'd love that if you were closer,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  4. #4
    Garrett booster
    Join Date
    Aug 2009
    Location
    detroit mi.
    Posts
    158

    Re: A-413 w/ welded bands

    is it a lockup trans would like to know more about it

  5. #5
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,559

    Re: A-413 w/ welded bands

    Not sure, will have to look. It should have a one-wire plug on the side somewhere if it is, right?
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

  6. #6
    turbo addict
    Join Date
    Dec 2005
    Location
    Pickering, ontario
    Posts
    2,670

    Re: A-413 w/ welded bands

    The lock up connector should be just to the left of the dipstick hole. It's usually a yellow, round connector with 2 contacts.

  7. #7
    turbo addict
    Join Date
    Aug 2009
    Location
    Myrtle Beach, SC
    Posts
    2,133

    Re: A-413 w/ welded bands

    I built this trans with the help of racerstev. Its non lockup.
    Alto 6 clutch pack in front drum.
    4 clutches in rear drum
    Racerstev welded and relined front band
    Racerstev modded springs
    Welded 5 pinion planetaries
    Solid ended output shaft and matching ring gear
    Sonnax rear strut and gov spring kit (1-2 around 6200 and 2-3 around 5900)
    Blocked accumulator
    I had a complete neon 31th and swapped all of the good stuff from that into this trans. It should be ready to run with a new valve body I think. I had burnt the rear clutches due to the wave snap ring flattening but I put new Mopar clutches and steels with a flat snap ring. I had no use for this trans so I gave it rob when he bought my omni.

  8. #8
    boostaholic
    Join Date
    Sep 2007
    Location
    Colorado Springs Colorado
    Posts
    1,005

    Re: A-413 w/ welded bands

    could I throw in a rmvb and run it? If so would you ship to 80911, paypal ready

  9. #9
    Hybrid booster
    Join Date
    Dec 2010
    Location
    Detroit MI
    Posts
    393

    Re: A-413 w/ welded bands

    I am interested if my trans is shattered and this trans is still available. I will be Checking it today and will let you know. I have paypal and I would have it shipped to oregon.

    update: My trans is toast. If it is still available let me know. I have paypal and would have it shipped to 97225.







    .
    Last edited by jefo; 06-26-2013 at 09:42 AM.

  10. #10
    Garrett booster
    Join Date
    Aug 2009
    Location
    detroit mi.
    Posts
    158

    Re: A-413 w/ welded bands

    Would love to have it adding a valve body is no big deal pc was down last night shipping to 48206 Paypal no problem

  11. #11
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,559

    Re: A-413 w/ welded bands

    Mr Glenn was first in line, will post if it falls through.
    Rob M.
    '89 Turbo GTC

    2.5 TIII stroker, 568 w/ OBX and 3.77 FD

Similar Threads

  1. Where go to get decent V-bands-ASAP.
    By turbovanmanČ in forum Exhaust
    Replies: 16
    Last Post: 07-25-2009, 02:43 PM
  2. why do wide bands display narrow also
    By Mr overkill in forum EFI Tuning
    Replies: 12
    Last Post: 05-15-2007, 09:26 PM
  3. Tool to crimp CV Boot bands?
    By ggariepy in forum Transmission
    Replies: 4
    Last Post: 04-12-2006, 02:40 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •