Valve Covers, 2 piece intake, Intercooler hoses, injector harness

[patcsx42]

Date: 13th June 2013
Username: patcsx42
Full Name: Patrick Pedroza
City, State, Zip: Anaheim, CA 92805
Contact: patcsx42@sbcglobal.net

If you are interested in a part please PM me your shipping info and I will figure out the lowest cost possible to ship to you. If multiple items are purchased then shipping will be cheaper. If you have any questions on a part feel free to ask. Feel free to make an offer on the parts. Prefer paypal payment and it can be sent to email listed in contact listed above.

Valve covers:
1. Chromed turbo valve cover - SOLD

2. Black turbo valve cover - This is a one piece valve cover that is in very good condition and appears to have no cracks or welds.
REDUCED to $40 plus shipping.

3. NEW Shelby valve cover - This one is also the old style that requires the cork gasket/4-piece gasket. This valve cover was on a new T2 motor I bought from the Shelby garage sale auction in Newport Beach, CA about 20 years ago. So this valve cover has never been on a running motor and is in excellent condition.
REDUCED to $180 plus shipping. SOLD






2-PIECE SHELBY INTAKE MANIFOLDS:SOLD

4. This 2-piece intake is in great shape was working before removed from my car and has been ported. Comes with fuel rail, 20% mopar injectors, Charge temp sensor, knock sensor, fuel pressure reg., brace and injector wiring harness. This is intake is ready to run, just add throttle body and hook up vacuum lines and wiring. Is already ported for 52mm throttle body. Fuel rail is fairly new due to original leaking.
SOLD

5. 2-piece intake bare.SOLD


HOSES:
listed in order from left to right.

6. New mopar CSX lower radiator hose. SOLD
7. New VNT lower intercooler hose set. Fits all the 90 VNT cars like shadow, Daytona and Le Baron. SOLD
8. 2 used lower intercooler hoses for all P-body/shadow and I think most other TurboII cars except L-body. In great shape, no rips or holes. REDUCED to $25 each plus shipping
9. 2 used lower intercooler hoses for L-body only. In great shape, no rips or holes. REDUCED to $25 each plus shipping 2 SOLD.

[IMG][/IMG]

[IMG][/IMG]


INJECTOR HARNESS:

10. New 86 GLHS injector harness.SOLD
11. Used harness still in great shape and all rubber and wire covers are still flexible. One injector end has a broken tab but I checked it and it will still clip and lock onto the injector. Has part # tag still on it 4414 322. Think it fits 88 & 89 TI. $15 plus shipping. SOLD

[IMG][/IMG]

[Fox]

i'm interisted in the shelby oil cap, if you would sell it separate let me know a price

[nvysion]

I would like to take the chromed valve cover, the 2-piece intake at $165 and the new mopar CSX lower radiator hose .
Please PM me if you accept to ship to france.
I will use paypal.

[cordes]

5. This 2-piece intake was in the process of being ported for one of my projects but ended up changing so it needs to be completed. This intake is pretty much bare. May have gasket for it.
$90.00 plus shipping.

I will take this.

[trbowgn]

Dibs on #4 if it does not go to France. PM'd you

[patcsx42]

PM's sent to all.

[BadAssPerformance]

In like for Intake item #4

[patcsx42]

Sorry I made a mistake, injector harness is not for an 89 CSX, just compared it to the one on my car and it is not the same. This harness does not have the charge temp connector like the 89 CSX harness does. It still has a part number tag on it 4414 322 plus some other # 48362 but have not been able to track down what else it will fit. If I do I will post and correct my original post above.

Patrick

[speeddemon]

Dropped you a PM.

[patcsx42]

[patcsx42]

Still a few items left to get rid of.

[89ShelbyGuy]

Iam interested in the injector harness. One question i have is if the main connector is the same thing as one that would use a charge air temp sensor. Reason i ask is cause i could just transfer my terminals to this one for my charge air.....lmk.

[patcsx42]

Yes the second connector which is oval has one used slot for knock sensor and the second is empty for the charge temp pin. Main connector is for injectors only. You could easily modify this to work. All the wires and tape are in excellent condition. I think this may be a new harness.

[patcsx42]

No one needs a valve cover.

[Speidz]

I will take a lowrt intercooler hose for the l body. Msg me shipping go 53144 if you could thanks.

[patcsx42]

PM sent.

I will take a lowrt intercooler hose for the l body. Msg me shipping go 53144 if you could thanks.

[robertclan4]

Have you sold all the parts? Or still have any to get rid of?
_____________
rubber bellows

[patcsx42]

All that is left in this thread is the black valve cover and the P-body lower I/C hoses.

Have you sold all the parts? Or still have any to get rid of?
_____________
rubber bellows

[nvysion]

I have received the parts I have bought, all were in nice shape and very well packed.
Patrick is a nice guy, I hope to deal with him again.