WTB good rebuildable Mitsu Turbo

[2.216VTurbo]

I've been going back and forth on the build on my 89 turbo Mini 'Woody' Im pretty much decided on a very mild build like Mr Berubi is doing on his van. I have already added a good 2.5" mandrel exhaust and a nice FMIC. I've also collected a TVL +1 head, a ported 2 piece IN mani and a ported EX mani. Last piece I need is a turbo. Since the exhaust is done and the IC plumbing is all done, I dont want to reinvent those wheels and put in a Garrett turbo that would make modding those pieces neccessary so that leaves me with staying with a Mitsu frame turbo. I'll get it upgraded locally but need a good rebuildable core to start with. No cracked junk please, PM me with what you have and can ship in the next 4-5 days. Thanks

[turbovanman²]

A Garrett will fit exactly the same for any of the inlet and outlet stuff FYI, of course, you have to change the lines. Not sure if you've driven a mini with a TII turbo and no other changes, its way better, going that way on the wifes van. Just thought I'd throw that out there,

[2.216VTurbo]

Got what I needed, thanks for looking.

I hear you on the Garrett set up Simon, the Mitsu will be easier and meet the needs of this project tho.

[turbovanman²]

Got what I needed, thanks for looking.

I hear you on the Garrett set up Simon, the Mitsu will be easier and meet the needs of this project tho.

NP,

[pauly_no_van]

I have 3 mitsus 2 are ready to go . . . 1 has 2x turbine nozzle and big wg hole.

[GLHNSLHT2]

wow, a TVL head and a mitsu. Kinda like running a stock Masi setup.