Anybody have a crank laying around to measure? I'd like to know if the crank is symmetrical front to back. I want to know if a crank can be installed with the flywheel on the end that the accessories are supposed to be on.
Anybody have a crank laying around to measure? I'd like to know if the crank is symmetrical front to back. I want to know if a crank can be installed with the flywheel on the end that the accessories are supposed to be on.
yep all the bearing journals are equally spaced and the crank will go into the block 180 degrees. My I ask why you want to do this?
You've got my interest...
If you plan to spin the engine the same way make sure you have the crank ground in a reverse rotation. If a crank isground reverse of how they run they will eat bearings.
Ian Adams Function>Form 1990 shadow scrapped, too rusty:( 1991 Spirit R/T Scrapped, parts sold:( 1989 Turbo Caravan Daily beater with built-[I]ish [/I]engine slowly evolving into weekend turbo beater.
John Laing
"The sole condition which is required in order to succeed in centralizing the supreme power in a democratic community, is to love equality, or to get men to believe you love it. Thus the science of despotism, which was once so complex is simplified, and reduced . . . . to a single principle."
-- Alexis de Tocqueville
"One of the methods used by statists to destroy capitalism consists in establishing controls that tie a given industry hand and foot, making it unable to solve its problems, then declaring that freedom has failed and stronger controls are necessary."
--Ayn Rand
"To evolve, you don't need a Constitution. All you need is a legislature and a ballot box . . . . things will evolve as much as you want. All of these changes can come about democratically; you don't need a Constitution to do that and it's not the function of a Constitution to do that."
-- Justice Antonin Scalia
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry
Bad laws are the worst sort of tyranny.
- Edmund Burke
I understand what you guys are saying, however, if the engine is built and running correctly there is no metal-to-metal contact. Also, the bearing surfaces are softer than the crankshaft steel.
The only way I can see running a crank counter to what it was originally running causing issues is if the oil supply holes are only chamfered in one direction, which can easily be corrected.
Also, keep in mind there are engines that use all the same internals, but run counter to each other. Boats that have straight inboard engines that are counter rotating are perfect examples. I've worked on these engines personally...there are no differences in the cranks, rods, bearings, pistons, ect.
That great if your able to swap crank end for end but the more going on in the block than you think the I shaft drive is on the other side wont work
You don't need an Ishaft with megasquirt running COP/DIS and an external pump dry sump oil system. I want to see the custom seal retainers and oil pan. Why cant the whole motor be installed 180 to get the output on the right side? You could reverse running rotation with a custom ground cam.