Results 1 to 5 of 5

Thread: key got stuck in the ignition.

  1. #1
    Hybrid booster
    Join Date
    Feb 2012
    Location
    Montreal
    Posts
    285

    key got stuck in the ignition.

    After a long winter, I started my car for the first time.
    Never had problem like that before.

    I had put the key in the ignition. Click to the on position. Lights on the dash came on and then I did the movement to start the engine.
    It did a click and then nothing.
    Battery was full of charge and I had no indication from the last time that the car had run that it would act like that.

    Anyway, here comes the funny part.

    I tried to started her back and it didn`t work. Felt like there was no juice. Lights in the dash didn`t came on at that point.
    I`m like, there, I have that fused llnk that died on me or what...so I tried to remove my key from the ignition.
    Didn`t work.
    I`m like, how come the key can`t come off. As far as I know, it`s all mechanical so I shouldn`t have any problem removing the key.
    I tried a few times turning the key to start or remove and I wasn`t able to either remove or start the car.
    I bang a few time on the steering wheel...guess what happen?
    I was able to remove the key from the ignition and when I tried to start the car, it worked!!!

    My friend looked at me clueless and I answered him back...it`s a Dodge, don`t ask!

    Any idea what happened?

    Not being able to have the car started is one thing but not being able to remove the key form the ignition was...weird!
    There`s no button that I have to push to remove the key does it?
    (Not on the GLH, right?)

  2. #2
    Super Moderator Turbo Mopar Staff 135sohc's Avatar
    Join Date
    Aug 2008
    Location
    SoMd
    Posts
    6,179

    Re: key got stuck in the ignition.

    If you put the key in and turn it to the 'run' position is it really loose and moves around freely ?

  3. #3
    turbo addict
    Join Date
    Dec 2005
    Location
    Lincoln, Nebraska
    Posts
    2,626

    Re: key got stuck in the ignition.

    Both my '86 GLHT and GLHS had a button on the steering column to allow the key to turn back so it could be removed. I don't know if the Canadian market cars were the same though.
    “If the people of the nation understood our banking and monetary system, I believe there would be a revolution before tomorrow morning.” -Henry Ford

  4. #4
    Hybrid booster
    Join Date
    Sep 2008
    Location
    Winnipeg, MB, Canada
    Posts
    612

    Re: key got stuck in the ignition.

    On all three of my Canadian-spec L-bodies there is a lock cylinder release button just infront of the ignition.

  5. #5
    Hybrid booster
    Join Date
    Feb 2012
    Location
    Montreal
    Posts
    285

    Re: key got stuck in the ignition.



    Before I go further, I`ll have to go back in the garage to make sure that there is a release button.

    So use to the H brand now that I might completely got assimiliated to that brand...

    Anyhow, I`ll check the play in the ignition too.

    Thanks!

Similar Threads

  1. Key Dinger Stuck on!
    By jefo in forum Interior & Exterior Restoration
    Replies: 3
    Last Post: 12-11-2012, 01:38 PM
  2. Lost my ignition key, best way to get a new one?
    By guyd_15 in forum Maintenance & General Tech
    Replies: 5
    Last Post: 05-12-2012, 11:07 PM
  3. HELP: Key Is Stuck In The Ignition!
    By JonsGottaDusta in forum "I need help!"
    Replies: 9
    Last Post: 07-01-2008, 07:28 PM
  4. Key STUCK in Ignition RUNNING...
    By TurboZJockey in forum "I need help!"
    Replies: 2
    Last Post: 05-12-2008, 09:04 AM
  5. non tilt ignition w/key and rod
    By Sethyboy85 in forum Parts Wanted
    Replies: 1
    Last Post: 04-26-2006, 07:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •