TB's and TIII Parts

[Kryp2nitE]

Date: 21st April 2013
Username: Kryp2nitE
Full Name: Chris Kraydich
City, State, Zip: Shelby Township, MI 48317
Contact: Chris.Kraydich at Gmail.com, but please PM or post here over email
Price: 40-180

Description: All prices shipped unless you are excessively far, then we will

91 Rockers/Shafts/Lifters $180 per set - I have two complete sets of rockers from running T3's, they have some gouging on the side but both came from fine running T3's, check pictures for details. I will throw in a couple of extra lifters for asking price for each set as spares.

TIII Exhaust manifold- $75 - One turbo stud needs replacing

52mm TB- $40 - From my running Spirit, no sensors.

TIII Turbo Core $150- no excessive play but the wastegate was sticky, would be a good core or rebuild youself and run it.

Dawes Gauge $40 - bought this for my old spirit and never used it, new but does not come with instructions

----
Sold so far

Dunn Head $600 Sold - Head has about 20k since it was sent out to a machine shop and put back on the car. Has Jackson modified retainers already installed, I don't think I put a tank of gas through it since they were installed. Comes with valves and springs installed. Comes with New core plugs (Not installed). No cracks, no leaks. Came off of my running car, wouldn't hesitate to put right back on and go.

TIII TU Fuel Rail- $Sold - Brand New, waiting something like 8 weeks to get this so get yours without the wait! Supports 500+ HP. http://turbosunleashed.com/shop/valv...ail-p-238.html

TU Fuel Rail Mounted AFPR- $Sold Also brand new, I will have to do something different with the new fuel rail setup so this is up for sale.
http://turbosunleashed.com/shop/fuel...afpr-p-35.html

58mm TB- $Sold - From a junkyard minivan, no sensors

TIII Cams- $175 SOLD - Good cores, one of the intake lobes has a small flaked off area. Exhaust looks fine to run as is.

Ported 58mm TB- $Sold Painted Black, one of lengels ports/rebuilds.

[Kryp2nitE]

Rest of the pictures:
Exhaust Manifold:


Manifold Ports:


Turbo:


Both 58mm TB's


One set of rockers:


Dunn Head retainers:


Dunn Head:

[moe44688]

interested in the TIII rockers/lifters, I need like four.

LMK

Thanks

[Kryp2nitE]

Cams pending with one in line.

AFPR packaged up and shipping out today

interested in the TIII rockers/lifters, I need like four.

I took a closer look last night and some of them are gouged, I've got to figure out a way to measure how bad it is and will let you know. They don't look any worse than the ones off my Spirit

I will let you know

[Kryp2nitE]

Cam and FPR shipped today.

58mm TB sold.

Added Dawes gauge

[Kryp2nitE]

Fuel rail sold.

[Kryp2nitE]

Fuel Rail shipped, updated the original post so its easier to see what has sold

[Kryp2nitE]

Cleaned up ad, Added Dunn Head and Rocker assemblies. Going to see if there is interest as a set before I part them out.

[Kryp2nitE]

Bump!

[Kryp2nitE]

58mm ported TB is gone

[iTurbo]

Don't suppose you have the big banjo bolt that attaches the power steering pressure hose to the pump?

[Kryp2nitE]

Don't suppose you have the big banjo bolt that attaches the power steering pressure hose to the pump?

Back from Mexico, did you find a bolt? I have my power steering stuff tucked away in case i ever go back. but I can send you one to use until you find a replacement.

Bump!

[Kryp2nitE]

Head is pending

[Kryp2nitE]

Head is sold, one set of rockers/shafts/lifters pending

[iTurbo]

Back from Mexico, did you find a bolt? I have my power steering stuff tucked away in case i ever go back. but I can send you one to use until you find a replacement.

Bump!

I found one, thanks though!

[Kryp2nitE]

One set of rockers/shafts/lifters gone. I might keep the second as spares.

Bump, someone has to need a turbo, manifold, 52mm TB or dawes gauge

[harley04]

Thanks Chris, rockers and lifters showed up today, I have also machined, powder coated and installed the throttle body on my sons 92 Spirit RT.