Hi guys
I installed the 360° thrust bearing in my T25G but it has some play in that center where my thumb points - is it supposed to be like that?
it feels quite loose in the center- that final silver plate with that collar - is that normal that there is such clearence (those parts are machined like that) which allows it to slightly move? or is there somethin Im missin (the c ring seal is installed in it)? it just didnt have such play with old 270° bearing as it was machined differently and the thrust collar was sittin without any play in that center... its kinda interesting anyway that there goes just that washer through the center of the 360° (it has tons of play) then the thrust bearing just sits on top of the 360° and only thing that holds it there is that top plate secured by that huge circlip... btw the clearance is apparent here (i have type with washer havin the collar though, but same space around 360° bearing....
please let me know thnku
Peter