Results 1 to 3 of 3

Thread: Recent order +!1

  1. #1
    Supporting Member Turbo Mopar Contributor iTurbo's Avatar
    Join Date
    Dec 2005
    Gillette, Wyoming

    Recent order +!1

    Just thought I would mention that I had recently made an order with Columbia River Mandrel Bends ( and was very pleased! I bought a couple 2.25" 45' aluminum bends for my Shelby CSX so that I could replace the OEM rubber lower intercooler hose. The order arrived quickly and I was very pleased with the product. The aluminum pipes have a thicker wall than what I had previously ordered from ATP has been a favorite vendor of mine over the years, but I must say the pipe I got from Columbia River was even better! Now I don't have to worry so much about over-tightening the T-bolt clamps because the aluminum mandrel bends I got from CR have a thicker wall. I wouldn't hesitate to order from them again.
    87 Shelby Lancer #127
    91 Dodge Spirit R/T
    08 Dodge Caliber SRT-4
    86 Dodge Omni GLH Turbo

  2. #2
    Join Date
    Oct 2007
    Stanton, DE

    Re: Recent order +!1

    I've had good luck with them too. My problem is that they are 3000 miles away.

  3. #3
    Garrett booster Turbo Mopar Vendor
    Join Date
    Feb 2006
    Saint Helens, OR

    Re: Recent order +!1

    Most of the pre-bent aluminum bends that are sourceable in the US are 0.059" (1.5mm metric) wall because they are bent in china or korea. There are only a handful of mandrel bending companies that are specialised enough to bend aluminum in the United States. The materials we use are US made (SAPA) 6061-T6, annealed to a T0 for bending then age hardended back to approximately a T3. It's expensive stuff.

    ---------- Post added at 04:40 PM ---------- Previous post was at 04:39 PM ----------

    Oh btw, thanks for the feedback.

Similar Threads

  1. Recent downtime
    By Frank in forum Board Discussion
    Replies: 6
    Last Post: 11-27-2010, 09:12 PM
  2. Recent Pictures
    By Turbo224 in forum 16v Factory Engines
    Replies: 11
    Last Post: 07-18-2008, 05:46 AM
  3. Recent photos of my CSX!
    By dodgeshadowchik in forum The Original "Turbo Dodge" Cars
    Replies: 26
    Last Post: 05-17-2008, 08:07 PM
  4. Recent Discoveries
    By BIGBRUDDA in forum Cars
    Replies: 0
    Last Post: 09-29-2006, 09:22 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts