Custom 2 piece upper plenum

[lengel]

Date: 02nd February 2013
Username: lengel
Full Name: Adam Lengel
City, State, Zip: Palmerton, Pa 18071
Contact: ablengel@ptd.net
Price: $325+shipping
Description:

Had a few extra plenum flanges from the last batch I did, so I thought I would try making two upper plenums for guys that dont have the resources to make one them self. These are made to use a 58mm TB, and are right around 3.2 liters. These will also work with a stock fuel rail. I can dill and tap vacuum ports where ever the buyer wants them. Here are some pictures. I will post some pics tomorrow after they are all welded up by the man Brian Slowe!

Thanks Adam

[Khajjathefang]

Nice lookin intake!

[Reaper1]

I'm liking the sunken bellmouths..even on the throtlebody exit!! NICE!

[Radiant_Red]

Posted on the other site about this

[turbovanman²]

Damn sexy,

Now get those TIII flange's done,

[lengel]

Nice lookin intake!

I'm liking the sunken bellmouths..even on the throtlebody exit!! NICE!

Posted on the other site about this

Damn sexy,

Now get those TIII flange's done,

Thanks guys!


Brian welded them up today. Here are some pics.

[rib256]

Nice weld beads

[turbovanman²]

They look like the stock muffler for my 2000 GSXR 750,

[lengel]

Both have been SOLD! If anyone is interested in one of these I could make another 3 but would need a $100 deposit from 3 people to get started on them.


Thanks Adam

[4 l-bodies]

Hey Adam,
Very Nice! Wow what a great price!
When a buddy of mine was making up Masi large plenum intakes he found in flowbenching that cylinders 3 & 4 were not flowing what 1 & 2 were until he lowered TB to floor of plenum. Actually he built a ramp in intake, sort of a false floor. Then airflow returned to cylinders 3 & 4 by flowing to them and not over them. Because of packaging, TB was so close to those cylinders that could have contributed or cause issue. Because you have a radius on the back side of TB perhaps you won't have this issue. So with that nugget in my noggin, when I made my large plenum intake, I put elbow on bottom edge of plenum.
Maybe you can talk Brian into flowbenching intake if he gets a chance and see what his results are. I know it's a lot of work, but it might be worthwhile.
Todd

[Reaper1]

Todd, do you have any pictures of said Masi intake?

[4 l-bodies]

Todd, do you have any pictures of said Masi intake?

Chris, No pics. Not my masi intake.

[contraption22]

Wow. Really nice!

[lengel]

Hey Adam,
Very Nice! Wow what a great price!
When a buddy of mine was making up Masi large plenum intakes he found in flowbenching that cylinders 3 & 4 were not flowing what 1 & 2 were until he lowered TB to floor of plenum. Actually he built a ramp in intake, sort of a false floor. Then airflow returned to cylinders 3 & 4 by flowing to them and not over them. Because of packaging, TB was so close to those cylinders that could have contributed or cause issue. Because you have a radius on the back side of TB perhaps you won't have this issue. So with that nugget in my noggin, when I made my large plenum intake, I put elbow on bottom edge of plenum.
Maybe you can talk Brian into flowbenching intake if he gets a chance and see what his results are. I know it's a lot of work, but it might be worthwhile.
Todd

Thanks for the input Todd! I could look it to doing something similar to what you stated, I just think it would drive the price up to where people wouldnt want them. I think this is a simple, effective, affordable piece for someone with out the means to build there own.

Wow. Really nice!

Thanks Mike

[Punish'nRice]

Both have been SOLD! If anyone is interested in one of these I could make another 3 but would need a $100 deposit from 3 people to get started on them.


Thanks Adam

Anybody else interested in one these?

Thanks for the input Todd! I could look it to doing something similar to what you stated, I just think it would drive the price up to where people wouldnt want them. I think this is a simple, effective, affordable piece for someone with out the means to build there own.



Thanks Mike

What kind of price increase would we be looking at if the plenuim had a 90 after throttle body plate?

[thedon809]

I would be interested in one with an elbow.

[nvysion]

+1
I want one

[moparzrule]

I ported a lower half and the owner sent one of these so I could port match the lower half with it. I having seen it in person I have to say this is a super high quality piece, dead sexy, and worth every penny.

[stormy69]

$ on parts kit only (no welding)? would like a two matching t-body flanges to add an elbow as well.

[lengel]

Thanks for the interest guys, but I dont know when I will be getting more free time to do more.

I ported a lower half and the owner sent one of these so I could port match the lower half with it. I having seen it in person I have to say this is a super high quality piece, dead sexy, and worth every penny.

Thanks for the feed back!