Page 1 of 7 12345 ... LastLast
Results 1 to 20 of 133

Thread: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

  1. #1
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,400

    2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    2013 Turbo-Mopar Times!
    Continuing into our fifth year!

    To review the 2012 archive page CLICK HERE
    To review 2012 submissions CLICK HERE
    To review the 2011 archive page CLICK HERE
    To review 2011 submissions CLICK HERE
    To review the 2010 archive page CLICK HERE
    To review 2010 submissions CLICK HERE
    To review the 2009 archive page CLICK HERE
    To review 2009 submissions CLICK HERE

    For new times posted in 2013, you must post in this thread with ALL of the following in the correct format PLEASE NOTE THE FORMAT:

    FORMAT

    Year --- Ride --- Power --- Gears(FDR:1) --- Grip --- Owner --- T-M Screen Name --- Country (, , , , , , , , etc.) --- 60' (X.XXX) --- 1/8ET (XX.XX) @ MPH (XX.XX) --- 1/4ET (XX.XX) @ MPH (XX.XX)

    EXAMPLE

    1987 --- Shelby Z --- 2.2L T-II FMIC --- A555(3.85:1) --- 24.5x8.5 M&H Slicks --- Jason Trotter --- BadAssPerformance --- --- 1.708 --- 7.54 @ 94.80 --- 11.62 @ 119.80



    NOTES:
    Lets try to clarify a little here under "Power" Here's the "Menu"

    Pick a displacement!
    2.0L, 2.2L, 2.4L, 2.5L, 3.0L etc...

    Pick a Turbo Option!
    T-I (log) <=== suck thru intake, non-intercooled
    T-I <=== blow thru intake, non-intercooled
    T-II <=== blow thru intake, factory intercooled
    T-III <=== 16V Lotus Head & Intercooled
    T-IV <=== VNT Turbo & Intercooled
    Masi <=== 16V Masi Head & Intercooled
    16V Hybrid <=== 2.2L or 2.5L with 2.0L/2.4L 16V head swap
    16V <=== for 2.0L and 2.4L factory 16V power
    SRT4 Stage X <=== SRT4 Stage X = 0, 1, 2, or 3

    Pick Suffixes as Needed!
    FMIC <=== Front Mount Intercooler
    AWIC <=== Air to Water Intercooler
    N2O XXX <=== Nitrous (indicate XXX HP hit size)
    Alky <=== added Meth or meth/water mix
    Hybrid <=== Hybrid 16V head on 8V Block
    E85 <=== If you're running 100% E85
    Meth <=== if you're running 100% Methanol injection


    -------------------------------------------------------------------
    Please upload your timeslip to our T-M Gallery HERE:


    And put a link to your slip in your post!
    -------------------------------------------------------------------

    NOTE TO ALL!

    ALL Turbo-Mopar times welcome! Even if you car doesnt run 9's, lets post them ALL up!

    -------------------------------------------------------------------
    NOTE TO ALL UPDATED TIMES

    If you already have a time for a vehicle posted, PLEASE note "UPDATE" in your update post, THANKS!
    -------------------------------------------------------------------

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  2. #2
    Hybrid booster shmedley's Avatar
    Join Date
    Dec 2005
    Location
    Downers Grove, IL
    Posts
    756

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    Hopefully I will get my car together and in this thread finally this year
    Thanks Brad S. SDAC National Proud Member SDAC Chicago Proud Member 14 Ram 1500 86 Shelby Charger "Chicago Stock"

  3. #3
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,400

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    Quote Originally Posted by shmedley View Post
    Hopefully I will get my car together and in this thread finally this year
    Yes you will, i have faith!

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  4. #4
    Supporting Member Turbo Mopar Contributor Ondonti's Avatar
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,036

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    BTW I just realized why you didn't update my 2012 time. I typo'd and wrote 14.8 not 13.8.

    Originally Posted by Ondonti
    Update:

    1994 --- Dodge Spirit --- 3.0L T FMIC --- a543(3.50:1) --- Kumho ASX 225-60-15 --- Brent Seman --- Ondonti --- USA --- 60' (2.410) --- 1/8ET (9.287) @ MPH (85.88) --- 1/4ET (13.858) @ MPH (108.84)
    Brent
    GREAT DEPRESSION RACING
    1992 Duster 3.0 The Junkyard- Now - Megasquirt II/Extra. OEM 10:1 3.0 + funny business
    - Old - 11.5@125 22psi $90 Stock 3.0 Junk Motor - 516whp 519wtq 20psi 91 oct built 3.0 stock n/a computer
    1994 Spirit 3.0 - 12.3@113 15 psi - Daily Holset He341 280whp 304ft/lb @10psi
    1994 Spirit 3.0 a670 - Wife's - Disassembled
    1990 Spirit 3.0 E.S. 41TE
    1993 Spirit 3.0 E.S. 41TE
    1994 Duster 3.0 A543
    1990 Lebaron Coupe 2.2 TII non IC, T1 31TH
    1981 Starlet KP61 Potential driver, 1981 Starlet KP61 Parts, 1983 Starlet KP61 Drag
    1998 Dodge 12v Cummins 47re 4x4 4dr longbed. No fuel plate. Mack plug, AFC & Spring mods. Boost elbow.

  5. #5
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    I give up, easier to admit defeat, lol.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  6. #6
    Supporting Member II Turbo Mopar Contributor Shadow's Avatar
    Join Date
    Dec 2006
    Location
    Aubigny, Manitoba, Canada
    Posts
    5,009

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!


    Robert Mclellan
    http://www.youtube.com/watch?v=wambNdfnu5M
    10.04 @ 143.28mph (144.82 highest mph)
    Worlds fastest 8v MTX Shelby Charger
    Manitoba's Fastest 4cyl!
    8 valve, No Nitrous!
    New clutch combo is the SH!T!

  7. #7
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,400

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    Quote Originally Posted by Ondonti View Post
    BTW I just realized why you didn't update my 2012 time. I typo'd and wrote 14.8 not 13.8.

    Originally Posted by Ondonti
    Update:

    1994 --- Dodge Spirit --- 3.0L T FMIC --- a543(3.50:1) --- Kumho ASX 225-60-15 --- Brent Seman --- Ondonti --- USA --- 60' (2.410) --- 1/8ET (9.287) @ MPH (85.88) --- 1/4ET (13.858) @ MPH (108.84)
    OK, that explains it! Will update next chance I get!

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  8. #8
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,537

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    '89 Lebaron Turbo GTC full street trim (about 3k lbs w/o me in it) -- 2.5 CB Stock w/ Wisecos and a ported exh mani, AWIC -- 523/568 hybrid 3.77 gear and OBX posi -- 26" slicks -- Rob Mercer -- Force Fed Mopar -- 1.95 60ft -- 9.03@76mph 8th mile

    Might be as far as I go w/ the stock top end and turbo. Went to the track last night w/ the 23.5 slicks and got my best launch ever, would've easily been 8.9x or maybe 8.8x, but at the top of first something in the diff let go So the drivetrain may be coming out soon for repairs and upgrades.
    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  9. #9
    boostaholic
    Join Date
    Jul 2009
    Location
    Quad Cities, IA
    Posts
    1,067

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    well the Lancer is moving up in the bracket!!! laid down a time which i think is pretty darn impressive for a stock T-1 mitsu NON IC and full weight!! here it is in all its glory!!! and JT saw the slip for proof

    1989 --- Dodge Lancer Shelby --- 2.5L non IC T1 --- A413 --- BFG Drag radials 205 50 15 --- Jaren Niewinski--- 22shelby --- USA --- 60' (2.008) --- 1/8ET (9.281) @ MPH (73.66) --- 1/4ET (14.655) @ MPH (90.40)

    BAM!!! all that it done to the car is 3 bar map, FFV injectors, a Cliff Ramsdell trans and one heck of a BB.com tune!!!

  10. #10
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,537

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    Good time! I fixed mine, just an axle, so I should be able to get it in the 8s on the current setup still.
    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  11. #11
    boostaholic
    Join Date
    Jul 2009
    Location
    Quad Cities, IA
    Posts
    1,067

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    Whew!! That had to be a sigh of relief finding just a bad axle!! Getyouself a set of drs or a set of slicks and yeah you will kill itinto the 8s for sure... Before i junked the daytona i was trying everything to get into the 7s with it.. Best it did was an 8.01... I was so close!! I dont see any reason the Lancer would go 8s as well once i get the cyl 4 knock figured out amd maybe an intercooler in it... Boost was only about 15 psi or so... With an IC i should be able ti turn it up a bit more... Or like Bakes said... Alky!!!!

  12. #12
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,400

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    Quote Originally Posted by Ondonti View Post
    BTW I just realized why you didn't update my 2012 time. I typo'd and wrote 14.8 not 13.8.

    Originally Posted by Ondonti
    Update:

    1994 --- Dodge Spirit --- 3.0L T FMIC --- a543(3.50:1) --- Kumho ASX 225-60-15 --- Brent Seman --- Ondonti --- USA --- 60' (2.410) --- 1/8ET (9.287) @ MPH (85.88) --- 1/4ET (13.858) @ MPH (108.84)
    Time updated! Nice mph, need slicks!

    Quote Originally Posted by Force Fed Mopar View Post
    '89 Lebaron Turbo GTC full street trim (about 3k lbs w/o me in it) -- 2.5 CB Stock w/ Wisecos and a ported exh mani, AWIC -- 523/568 hybrid 3.77 gear and OBX posi -- 26" slicks -- Rob Mercer -- Force Fed Mopar -- 1.95 60ft -- 9.03@76mph 8th mile

    Might be as far as I go w/ the stock top end and turbo. Went to the track last night w/ the 23.5 slicks and got my best launch ever, would've easily been 8.9x or maybe 8.8x, but at the top of first something in the diff let go So the drivetrain may be coming out soon for repairs and upgrades.
    Time updated! Nice time, so close to the 8's! +1 for smaller slicks. BTW, what brand/width were the 26's I could add that to the data ... also glad it was only the axle!

    Quote Originally Posted by 22shelby View Post
    well the Lancer is moving up in the bracket!!! laid down a time which i think is pretty darn impressive for a stock T-1 mitsu NON IC and full weight!! here it is in all its glory!!! and JT saw the slip for proof

    1989 --- Dodge Lancer Shelby --- 2.5L non IC T1 --- A413 --- BFG Drag radials 205 50 15 --- Jaren Niewinski--- 22shelby --- USA --- 60' (2.008) --- 1/8ET (9.281) @ MPH (73.66) --- 1/4ET (14.655) @ MPH (90.40)

    BAM!!! all that it done to the car is 3 bar map, FFV injectors, a Cliff Ramsdell trans and one heck of a BB.com tune!!!
    Time added! Nice work Jaren! was happy to see the txt time slip! and jealous I havn;t run down the 1320 yet this year myself :/

    Times Page Updated!!! CLICK HERE to SEE!!!

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  13. #13
    boostaholic
    Join Date
    Jul 2009
    Location
    Quad Cities, IA
    Posts
    1,067

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    i know right, there is something therapeutic about getting those time slips... but then again you been cranking away on OPP (other peoples projects) and cant WAIT to see the progress of a so called "silver super shocker"!! 2 in the front 5 in the back

  14. #14
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,537

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    Quote Originally Posted by BadAssPerformance View Post


    Time updated! Nice time, so close to the 8's! +1 for smaller slicks. BTW, what brand/width were the 26's I could add that to the data ... also glad it was only the axle!
    M&H Racemasters 26x6/15

    I'm trading them for a set of 23" this week I have a set of 23.5" M&H's (the ones I broke the axle on) but they are pretty worn.
    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  15. #15
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,537

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    Also, weighed the car this week and it weighs 3100 w/ a full tank and no driver.
    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  16. #16
    turbo addict
    Join Date
    Feb 2010
    Location
    Piedmont, Ohio
    Posts
    4,109

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    Took my van to the track for the first time tonight. Local track is a dinky 1/8th but I can't complain.


    One lane had some oil at 40-60 feet letting it brake loose in second so I switched to the right. I don't have a bobble strut so trying to launch it hard or slamming second gave me some nasty wheel hop. My best 60ft was 2.591 hopefully when I get a bobble and get rid of the snow tires that will get better. My best mph was 69.67, I'm having a valve float issue so this is affected as I can't go over 4500 without major power loss. And best 1/8 was 10.483.


    So best MPH run

    Reaction: .391
    60: 2.775
    Mph: 69.67
    660: 10.619

    Best 660 run

    Reaction: .268
    60: 2.591
    Mph: 68.04
    660: 10.483

    To support the Format:

    1989 --- Caravan --- 2.5 T1, Garrett, FMIC -- A523(3.77) --- 205/70-15 Snow tires --- Ian Adams --- Shackwrrr --- --- 60' (2.591) --- 1/8ET (10.483) @ MPH (68.04)
    Last edited by shackwrrr; 06-15-2013 at 12:23 AM.
    Ian Adams Function>Form 1990 shadow scrapped, too rusty:( 1991 Spirit R/T Scrapped, parts sold:( 1989 Turbo Caravan Daily beater with built-[I]ish [/I]​engine slowly evolving into weekend turbo beater.

  17. #17
    Moderator Turbo Mopar Staff Force Fed Mopar's Avatar
    Join Date
    Dec 2005
    Location
    Greenville/Spartanburg SC area
    Posts
    7,537

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    I have valve float issues too I believe, has no real power above 5k, just kinda quits pulling.
    Rob M.
    '89 Turbo GTC
    2.5 TIII swap is here!

    Project LookOwt
    '91 Daytona ES, 61k original miles, Rick Lozier's old 3.0 nitrous car
    Back to basics, then the mods go back on....

  18. #18
    Supporting Member Turbo Mopar Contributor Rampage16V's Avatar
    Join Date
    Dec 2005
    Posts
    857

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    1987 --- Shelby Z --- 2.4 16V Turbo 904/8.75 4.56:1 --- 28.5X10.5 M&H Slicks --- Dean Stillie --- Rampage16v --- 1.4851 --- 6.6130 @ 105.14 --- 10.344 @ 128.21

    Dean Stillie
    87 Shelby Z 2.4 Turbo 9.06@146.05
    82 Rampage 2.4 Turbo 10.14@138.02

  19. #19
    Supporting Member II Turbo Mopar Contributor Shadow's Avatar
    Join Date
    Dec 2006
    Location
    Aubigny, Manitoba, Canada
    Posts
    5,009

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    Nice going Dean, 9's should be right around the corner

    Robert Mclellan
    http://www.youtube.com/watch?v=wambNdfnu5M
    10.04 @ 143.28mph (144.82 highest mph)
    Worlds fastest 8v MTX Shelby Charger
    Manitoba's Fastest 4cyl!
    8 valve, No Nitrous!
    New clutch combo is the SH!T!

  20. #20
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 2013 Turbo-Mopar Times - DATA COLLECTION THREAD!!!

    How much boost Dean? That's awesome,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

Page 1 of 7 12345 ... LastLast

Similar Threads

  1. 2012 Turbo-Mopar Times - DATA COLLECTION THREAD!!!
    By BadAssPerformance in forum Events, Racing, & Results!
    Replies: 146
    Last Post: 01-06-2013, 08:31 PM
  2. 2011 Turbo-Mopar Times - DATA COLLECTION THREAD!!!
    By BadAssPerformance in forum Events, Racing, & Results!
    Replies: 189
    Last Post: 01-16-2012, 12:29 AM
  3. 2010 Turbo-Mopar Times - DATA COLLECTION THREAD!!!
    By BadAssPerformance in forum Events, Racing, & Results!
    Replies: 190
    Last Post: 02-13-2011, 05:02 PM
  4. 2009 Turbo-Mopar Times - DATA COLLECTION THREAD!!!
    By BadAssPerformance in forum Events, Racing, & Results!
    Replies: 382
    Last Post: 03-28-2010, 10:29 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •