Share you're 2-step setups w M.S. and other systems-

[john1320]

Share you're 2-step setups w M.S. and other systems- pics, thoughts, testimonies.. and ideas

[shackwrrr]

Turbonator SMEC V18. Spark cut 2 step at 3500 with -7deg timng just for fun under 5mph(automatic) No flames yet but I think I need to make it higher.

[john1320]

Turbonator SMEC V18. Spark cut 2 step at 3500 with -7deg timng just for fun under 5mph(automatic) No flames yet but I think I need to make it higher.

What's the boost level w spark cut at 3500? Sounds like great fun on the auto! What trigger is used for step?

[GLHNSLHT2]

had a 2 step in the old D-cal code. 2850 at the track on street tires and 2000 on the street. about 0-2psi depending on setting is all the street tires would hold. I had an adjustable clutch switch that utilized one of those sprung door hinges I could set it so if you just breathed on the clutch the 2 step would engage. Made it great for letting other people driving the car to keep from resting their foot on the clutch.

[shackwrrr]

What's the boost level w spark cut at 3500? Sounds like great fun on the auto! What trigger is used for step?

I havent tried since I put the MBC in since Ive been having ECU issues where it starts acting weird. Before the MBC it would shoot strait to wastegate boost.

It is set to work with speed only. If I am below 5mph the limiter is 3500, as soon as I go faster it turns off. After I get my issues figured out Ill have to try it a little higher and see if I can make 18psi on the limiter.

[ShelGame]

Turbonator SMEC V18. Spark cut 2 step at 3500 with -7deg timng just for fun under 5mph(automatic) No flames yet but I think I need to make it higher.

Actually, I found an error in the v18 anti-lag calculation. It's not quite right. I'll be posting a fix for it later...

[shackwrrr]

sweet

[wallace]

I've used the ms2 2 step and it works really well. You will have to play around with the settings to get to actually hold the rpm at the target but once I got that done it worked very well. You guys are retarding timing with an automatic to get the boost to come on?

[ShelGame]

Automatic or manual, it works with either one. I made ~5psi in neutral, with the car on stands...

[john1320]

Automatic or manual, it works with either one. I made ~5psi in neutral, with the car on stands...

[168glhs1986]

My Electromotive TecGT is sweet. If you dont want the costs of the full ems, i would recommend this

http://www.electromotive-inc.com/products/xdi2.php