I am gone all next week. If you want it, contact me before tomorrow…or when I get back.
I am gone all next week. If you want it, contact me before tomorrow…or when I get back.
Great stuff for great cars! Poly engine mounts and bushings at: http://www.polybushings.com
Any of you guys with 17 inch wheels running a 225/50/17? I scored a set of michelins at work for free that are 5/32,enough to make it through a summer.
I don't see a problem with them. I'm running 245/45/17 IIRC.
James Reeves - Reeves Racing
World's Fastest 8 Valve - 146.88 mph
86 GLH-T 9.99 at 143.78 mph
86 GLHS #169 Mom's - complete Super 60 car
87 Shelby Z 14.16 Dad's - mostly stock, no sh*t!
88 Shelby Z 13.5 - been in storage for 15 years
03 SRT-4 12.24 Mom's
07 Charger 5.7L 12.48 Dad's
Thanks James, now to find wheels for them!Originally Posted by Reeves
That's not true. There are 3.50FD 543s. I own one. It may have been a 1990-only thing.The only FD option was 3.77.
Dont push the red button.You hear me?
I think my van has the 3.50 final drive in it too. I rather have the 3.77 for towing haha.
Here is my 89 Voyager SE. Originally automatic, converted to a523. Bought from original owner in 2012 with 110k miles. Now has 140k miles.
Engine Stats:
Refreshed stock 2.5L bottom end. Refurbished stock head (stock valvetrain/cam). NOS Garrett T2 turboBalance shaft case gutted and oil line plugged. Underdrive Pulley
Airflow Path: Big Spectre Cone filter placed behind grille, 3" piping to ported Garrett T2 turbo, 2.5" intercooler piping to Treadstone TRV1859 intercooler, 2.5" piping to 52mm throttle body, Crazyeye modified 1 piece intake, TU ported exhaust manifold, ported swingvalve to 2.8", 3" downpipe to 3" electric cutout before cat, then stock exhaust.
Transmission:
Recently rebuilt 91' 3.50 a523 with diff pin savers, Redline MT90 fluid. T2 Clutch.
Suspension:
Polybushings Big swaybars front and rear. Poly control arm bushings. Front spring cut 1 coil. Sensutrac shocks all the way around.
There is probably some stuff I am forgetting. On the stock computer (at 13psi) with the cutout closed (stock exhaust) it ran a best of 14.7 at 92mph. Will be getting stage 5 computer/+40 injectors/3bar soon.
Here is it's youtube channel.
https://www.youtube.com/user/therealjefo/videos
Last edited by jefo; 03-16-2015 at 10:06 PM.
Wow, very cleanEngine pics? The engine and trans are out of Woody right now trying to get him ready for MATS in 2 weeks
AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
I just zipped thru this whole thread (because it's awesome) and I was surprised I never uploaded this pic of the three brothers, Woody, BlueWrench, and Whiteout.
AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
Nice 3-way Alan!
Wayne H.
'91 Dodge Spirit ES 2.5L turbo 5spd
'05 PT GT 2.4T HO autostick (RIP)
'89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
'89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
and other cars, trucks and motorcycles
https://www.youtube.com/user/SlugmobileMeanMini
Hibernating in front of new whip, wife says "replacement"
DD1: '02 T&C Ltd, 3.8 AWD. DD2: '15 Versa Note SV, replacing.. DDx: '14 Versa Note SV << freshly killded :( ....... Projects: '88 Voyager 3.0, Auto with shift kit, timing advance, walker sound FX muffler on 15" pumpers wrapped in 215/65/R15 H rated Nexens.... and a '95 phord escort wagon PnP head << Both may need to go :( ..... I like 3.0s ... so??? ... stop looking at me like I've got two heads!
I'd say you have an affinity for those lace wheels.I just zipped thru this whole thread (because it's awesome
As Requested here is an engine pic:
Doesn't look like anything special
Those are FondiMetal wheels, they are a F1 supplier. Very high quality and off of the most expensive Chrysler ever produced(at the time between 89-91). Any guesses which model or why I have lots of spares
My Bro and I pulled the drivetrain out of Woody to install the new TVL big valve head, custom 3.8 elbowed one piece IN Mani, FWD Perf ported EX mani, Modded mitsu turbo, AJ built OBX LSD Lock up TC 413 and a few other goodies to prep for MATS in 10 days. Gonna be close...
AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
^You may need to add a helper spring on that mitsu wastegate actuator if you want higher boost. When I had a mitsu I ported the bypass hole like that and after my max boost was 16psi I believe. But it looks good.
You could even be scientific and work out area exposed times pounds per square inch and get a spring that strong... or you know just grab one off a 18PSI rad cap and hope.
DD1: '02 T&C Ltd, 3.8 AWD. DD2: '15 Versa Note SV, replacing.. DDx: '14 Versa Note SV << freshly killded :( ....... Projects: '88 Voyager 3.0, Auto with shift kit, timing advance, walker sound FX muffler on 15" pumpers wrapped in 215/65/R15 H rated Nexens.... and a '95 phord escort wagon PnP head << Both may need to go :( ..... I like 3.0s ... so??? ... stop looking at me like I've got two heads!
The white wheels are jeep wheels aren't they... love itI just zipped thru this whole thread (because it's awesome
Ian Adams Function>Form 1990 shadow scrapped, too rusty:( 1991 Spirit R/T Scrapped, parts sold:( 1989 Turbo Caravan Daily beater with built-[I]ish [/I]engine slowly evolving into weekend turbo beater.
Whiteout is a 90 so it's 5X114, consequently, yes the 15X7 Jeep lace wheels fit. I did cheat and have them stripped and powdercoated. I think we are all impressed how they fill out the wheel wells. STANCED!
AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
Put some roid bearings and a new pan gasket on Woody today, one step closer to MATS!
AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
90 Masi 16V White/Ginger/Black
89 TC Masi 16V Red/Ginger/Black
86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
My profile page has over 20,000 views, I'm somebody LOL
May have to look out for those for winter wheels for teh n00b.Whiteout is a 90 so it's 5X114, consequently, yes the 15X7 Jeep lace wheels fit. I did cheat and have them stripped and powdercoated. I think we are all impressed how they fill out the wheel wells. STANCED!
DD1: '02 T&C Ltd, 3.8 AWD. DD2: '15 Versa Note SV, replacing.. DDx: '14 Versa Note SV << freshly killded :( ....... Projects: '88 Voyager 3.0, Auto with shift kit, timing advance, walker sound FX muffler on 15" pumpers wrapped in 215/65/R15 H rated Nexens.... and a '95 phord escort wagon PnP head << Both may need to go :( ..... I like 3.0s ... so??? ... stop looking at me like I've got two heads!
Posting Permissions
Reply With Quote
