Results 1 to 18 of 18

Thread: TI complete engine, +40 injectors, 1pc intake, big turbo

  1. #1
    Garrett booster
    Join Date
    Oct 2006
    Location
    hellam PA
    Posts
    166

    TI complete engine, +40 injectors, 1pc intake, big turbo

    Date: 20th December 2012
    Username: boneyardracing
    Full Name: Blair Warner
    City, State, Zip: York PA 17406
    Contact: bwarner@boneyardracing.net 717-968-6083
    Price: $750 for the lot

    Freshly rebuilt TI non common block 2.2 TI 6 Bolt Crank. The engine spins and has compression. New gaskets and seals. Requires 6 bolt turbo flywheel that is not included. Currently installed on the engine are:

    1pc TII intake with 52mm throttle body: $100
    +40 Mopar Performance Injectors: $100
    Garrett style Chrysler T3 exhaust manifold: $50
    50trim T4 compressor housing and wheel mated to OE Garrett turbo $100
    Long Block: $300

    Or take it all for $600. I can deliver if need be.






    Here are some better pics with out the name tag I apologize if this is against the rules




    TII valve cover $25


    FWD Performance stage 5 ecu for 87 electronics $150

    Ive been out of the TM seen for awhile if the prices are off base just let me know feel free to make offers

    Last edited by boneyardracing; 12-24-2012 at 12:07 AM. Reason: Corrections and lowered prices

  2. #2
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    Do you know anything more about the turbo? What compressor and turbine wheel?

    Dont push the red button.You hear me?

  3. #3
    Garrett booster
    Join Date
    Oct 2006
    Location
    hellam PA
    Posts
    166

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    .48 turbine wheel
    .63 compressor wheel
    2" outlet
    3" inlet
    Journal bearing center section

  4. #4
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    Hmm ok. That tells the A/R of the housings but not what the wheels themselves are.

    If you find any other info on it, post it up. If not i cant really tell what the heck it is. I think the price could be very good depending on what it actually is. Good luck with sale!

    Dont push the red button.You hear me?

  5. #5
    Garrett booster
    Join Date
    Oct 2006
    Location
    hellam PA
    Posts
    166

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    Im sorry to say that is all I know again just to be 100% clear its based off of a Chinese/Ebay turbo I built it awhile back and just dont know much about it. How would I go about finding out what the wheels are?

  6. #6
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    You would have to remove the compressor housing and measure the diameter of the front and back of the wheel (inducer and exducer diameters). The exhaust side you could probably leave the turbine housing on and just remove the swingvalve housing and just take a pic since it's pretty easy to identify turbines in our stock housing just by looking at them.

    Dont push the red button.You hear me?

  7. #7
    Hybrid booster
    Join Date
    Nov 2008
    Location
    Timonium MD
    Posts
    491

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    It looks like a 50-trim compressor housing, wheel and backing plate on a stock turbo. The China turbo center sections are non-watercooled.

  8. #8
    Garrett booster
    Join Date
    Oct 2006
    Location
    hellam PA
    Posts
    166

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    That may very well be as I said its been quite some time since it was put together and frankly I dont remember much about it. Is there something wrong with my computer or are the pictures gone?

    Price reduced on the the lot $600 for everything

  9. #9
    Moderator Turbo Mopar Staff Vigo's Avatar
    Join Date
    Feb 2006
    Location
    San Antonio,TX
    Posts
    10,798

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    Forgot to mention, if it is a 6 bolt crank it is a 2.2 as there were never any 2.5s with a 6 bolt crank. 6 bolt turbo motors did get the 'big rods' that are basically the same as t2 rods but with pressed pins.

    Dont push the red button.You hear me?

  10. #10
    Garrett booster
    Join Date
    Oct 2006
    Location
    hellam PA
    Posts
    166

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    Edited first post with corrections. I apologize for the errors.

  11. #11
    Garrett booster
    Join Date
    Oct 2006
    Location
    hellam PA
    Posts
    166

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    $400 for the engine, turbo, intake, and, injectors.
    $100 for the A555
    $100 for the computer


    Somebody has to want this stuff. Pretty much any offer will be accepted! Best to call or text 717-968-6083

  12. #12
    Garrett booster
    Join Date
    May 2009
    Location
    McAllen, Texas
    Posts
    228

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    how much for the turbo and injectors shipped to 78501?

    Thanks!

  13. #13
    Garrett booster
    Join Date
    Oct 2006
    Location
    hellam PA
    Posts
    166

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    Someone from Hanover texted me last night sorry I lost your number. Everything you were looking for is avaliable

  14. #14
    Garrett booster
    Join Date
    Oct 2006
    Location
    hellam PA
    Posts
    166

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    Injectors sold

  15. #15
    Mitsu booster
    Join Date
    Sep 2012
    Location
    york, pa
    Posts
    49

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    hey you live near me!! how well do those turbos run with out the use of the coolint flowing through them? does it affect the life of the turbo? i know my buddies cummins turbo only has oil flowing through it.

  16. #16
    Garrett booster
    Join Date
    Oct 2006
    Location
    hellam PA
    Posts
    166

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    ^ Turbos were not water cooled for a long time. You need to give it a minute or two to cool at idle before you shut the car off no big deal.

  17. #17
    Mitsu booster
    Join Date
    Sep 2012
    Location
    york, pa
    Posts
    49

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    i always wounderd about that thanks for clearing that up with me, would you sell just the turbo?

  18. #18
    Garrett booster
    Join Date
    Oct 2006
    Location
    hellam PA
    Posts
    166

    Re: TI complete engine, +40 injectors, 1pc intake, big turbo

    Sure $100 sound fair?

Similar Threads

  1. Fuel 2 Piece Intake Complete with Injectors and TB
    By CSX194 in forum Parts For Sale
    Replies: 35
    Last Post: 02-28-2011, 04:21 PM
  2. General 1pc intake, fuel rails, T2 fuel injectors, misc stuff
    By jamesmonty in forum Parts For Sale
    Replies: 11
    Last Post: 09-10-2009, 07:29 PM
  3. Engine CB Rods/ 1pc Intake/ Exh Manifold/ Turbo
    By Kevin in forum Parts For Sale
    Replies: 8
    Last Post: 06-28-2008, 07:26 PM
  4. FPR same for 1pc and 2pc intake?
    By RedDeerGLH in forum Electrical & Fuel System
    Replies: 1
    Last Post: 02-10-2007, 09:46 PM
  5. Powder Coated 1pc intake.
    By Turbodave in forum Parts For Sale
    Replies: 1
    Last Post: 07-31-2006, 09:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •