Just finished my rectangular side exhaust outlet. What do you think?
I had a 3" pipe hanging down that was hitting the ground for the last year.
Andy
Just finished my rectangular side exhaust outlet. What do you think?
I had a 3" pipe hanging down that was hitting the ground for the last year.
Andy
Not bad dude! I personally would make it flush with the ground effects and put a canter in it, so it is like the following...
of course it is just my opinion....
Frank Katzenberger
Squirrel Performance - Home of the best turbo calc!!!
http://www.squirrelpf.com
91 Daytona Shelby - It is getting there
87 Shelby CSX #418 - Near stock is a good thing!
94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top
"... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"
Visit the new Knowledge Center today!
Check out the one and only Shelby Dodge Registry!
Frank
Nice Idea I think I will take you up on that. A friend of mine suggested I cut it off flush and I like the slant cut too.
andy
Nice!!
Very nice!!
I was thinking of doing an oval end in a similar fashion.
Lookin good! and still getting like a billion MPG!
Clay
1986 GLH-T - Flat black......... learn it, love it, LIVE IT!
1988 LeBaron GTC Turbo
SDML Readers Rides
C/S Registry
Stuff For Sale
Andy needs to show some pics of under the hood!!!
Nice job on the exhaust, we were thinking of doing a turndown on my Son's Lancer Shelby, but since you have this all figured out......
Nice.
If I don't end up going with an over-the-axle pipe on the Sundance, I need to do something similar. The end of the pipe is really getting hammered because it hangs so low.
Nice, NASCAR style,
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Thanks, hopefully I can get around to cutting the slant into it. But like most of my projects they get around 95% complete and Im off to another one. The car needs new tires and I dont want to buy 15" tires. I have a set of 16" pumpers and was thinking about painting them with Black urethane. How would black pumpers look on a shelby lancer???????
Clay, how's going as FP1 engr? need to get my butt over there. Still in the mid to upper 30's in MPG
Tracy,
Saw you standing in that hole at the Nats. I wanted to go there but had a wedding and funeral on saturday. Maybe Ill make it out to Edgewater soon.
andy
I think the black pumpers would look great
-Gary Mazzone-
1986 GLHS #168
nice exhaust, but not feeling the tip.
Then ya need to do it better, cause my Tona has 3" straight out the side with 90 suspension (drops the front end 3/4" vs. 87 suspension) and Koni's and Eibachs. The apt complex next to me has nasty huge speed bumps and it still won't scrape the pipe.Originally Posted by lancer402
Copy Cat!
lol, looks good
heres how i did mine on my daytona... http://www.turbo-mopar.com/forums/showthread.php?t=3862
yes turbomopar87 when I see a good idea, I use it. lol
so far so good! wen you come over you can give me a filter lesson!!!Originally Posted by lancer402
Clay
1986 GLH-T - Flat black......... learn it, love it, LIVE IT!
1988 LeBaron GTC Turbo
SDML Readers Rides
C/S Registry
Stuff For Sale
Looks great, and it beats the heck out of having to run it to the rear. Much less work involved, and proabably sounds great.
Can we get a sound clip?