Problems with MPScan

[1984rampage]

Does MPScan not work with the LM? When I import an lst file into MPScan to define the ram locations, nothing is defined except for the name of the location. When I use an lst file from an SMEC based cal, however, all of the ram locations, values, units, etc are defined.

Anyone know how I can get the ram locations defined for use using a LM or can I use the SMEC lst file

[ShelGame]

Does MPScan not work with the LM? When I import an lst file into MPScan to define the ram locations, nothing is defined except for the name of the location. When I use an lst file from an SMEC based cal, however, all of the ram locations, values, units, etc are defined.

Anyone know how I can get the ram locations defined for use using a LM or can I use the SMEC lst file

That would be ebcause the .asm your using doesn't have the MP Scan setup built into it. I posted an MP Scan setup file for the LM - http://www.turbo-mopar.com/forums/sh...=mp+scan+setup

Maybe it should be stickied...

[1984rampage]

Makes sense. Yea maybe that link could be added to the MPScan sticky to help future users

[wowzer]

rob - i think those setup files are for the old version of mpscan. probably needs to be updated.

[ShelGame]

rob - i think those setup files are for the old version of mpscan. probably needs to be updated.

Doh! I think you're right...

[1984rampage]

So what files need to be used for the new MPScan?

[wowzer]

take a look at this old video i did. it should help with getting you started.

http://www.turbo-mopar.com/forums/sh...l=1#post898483