Results 1 to 20 of 20

Thread: 8 valve log header, stock flanges, turbo in damn near stock location.

  1. #1
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    8 valve log header, stock flanges, turbo in damn near stock location.

    Date: 24th November 2012
    Username: turbovanman
    Full Name: Simon Field
    City, State, Zip: Abbotsford
    Contact: PM

    SOLD

    Go here if you want one and we will be building a tube header soon-

    http://www.turbo-mopar.com/forums/sh....&goto=newpost



    Had this built but due to some PM confusion, its not what they want so here it is for sale, trust me, its purdy.

    It will NOT CRACK and no brace needed, tested with a one and 2 piece intake.











    Last edited by turbovanmanČ; 11-26-2012 at 04:40 PM.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  2. #2
    Supporting Member Turbo Mopar Contributor zin's Avatar
    Join Date
    May 2006
    Location
    ca
    Posts
    4,479

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    It does look like a well built piece!

    Mike
    "The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government - lest it come to dominate our lives and interests." - Patrick Henry

    Bad laws are the worst sort of tyranny.
    - Edmund Burke

  3. #3
    turbo addict
    Join Date
    Aug 2009
    Location
    Myrtle Beach, SC
    Posts
    2,133

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    I wish I wasn't poor. I would love one next summer though.

  4. #4
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    Quote Originally Posted by thedon809 View Post
    I wish I wasn't poor. I would love one next summer though.
    We aren't going anywhere, well not yet anyways,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  5. #5
    turbo addict
    Join Date
    Aug 2009
    Location
    Myrtle Beach, SC
    Posts
    2,133

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    Quote Originally Posted by turbovanman View Post
    We aren't going anywhere, well not yet anyways,
    One of those and a modded 1 piece once work picks up this summer.

  6. #6
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    Quote Originally Posted by thedon809 View Post
    One of those and a modded 1 piece once work picks up this summer.
    Sounds good,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  7. #7
    Supporting Member II Turbo Mopar Contributor ajakeski's Avatar
    Join Date
    Sep 2007
    Location
    SE Wisconsin
    Posts
    2,624

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    Very pretty.
    Have you run one on a car yet? How does it preform?

  8. #8
    turbo addict
    Join Date
    Apr 2007
    Location
    Atlanta
    Posts
    1,632

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    Interested. You plan on making any more of these (i.e. do I need to jump on this now or will more be available in the future at this price)?

  9. #9
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    Quote Originally Posted by ajakeski View Post
    Very pretty.
    Have you run one on a car yet? How does it preform?
    Thanks. No testing, just a run of the mill log header, but built like a brick shitt house, lol.

    Quote Originally Posted by chilort View Post
    Interested. You plan on making any more of these (i.e. do I need to jump on this now or will more be available in the future at this price)?
    Plan on making them as long as people want them, but keeping the price a bit low to get a few out. If you want one, I'll sell you one at that price. Get back to Shayne regarding your intake, you intake is next.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  10. #10
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    4,809
    Material of construction?
    I may be interested in one for my Spirit after some installation and test data is available.
    Or, since Slug is still apart she could play guinea pig if doesn't sell.

    Would a different turbo line kit be required?
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick (RIP)
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  11. #11
    Hybrid booster
    Join Date
    Sep 2010
    Location
    lower rainland b.c
    Posts
    409

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    its sch10 304 ss, nice and strong under high heat, and will reisist cracking much better than mild steel. all of the turbo supply lines for oil, coolant, and intake and exhaust plumbing should go right back on.
    for the record also, i mocked up this manifold while using a log turbo and intake to keep tabs on how far it has moved, and you could run this manifold on a log setup with a slight re-clocking of the turbo compressor housing.

  12. #12
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    4,809
    flanges 304SS as well? I assume so.

    Simon, how much do you figure shipping to USA 27527 would be?
    You can put me next in line.
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick (RIP)
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  13. #13
    Hybrid booster
    Join Date
    Sep 2010
    Location
    lower rainland b.c
    Posts
    409

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    yep all 304ss. 1/2" flanges front and back.

  14. #14
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    Quote Originally Posted by wheming View Post
    flanges 304SS as well? I assume so.

    Simon, how much do you figure shipping to USA 27527 would be?
    You can put me next in line.
    Clear out some PM's,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  15. #15
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    4,809
    what do you mean? I've only got 210??

    oh wait, let me guess, my membership expired??
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick (RIP)
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  16. #16
    Supporting Member II Turbo Mopar Contributor ajakeski's Avatar
    Join Date
    Sep 2007
    Location
    SE Wisconsin
    Posts
    2,624

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    I gotta have one. PM sent

  17. #17
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    Wayne, delete some PM's, I need to talk to you about this, your first in line and others are waiting, thanks.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  18. #18
    Hybrid booster
    Join Date
    Nov 2008
    Location
    Timonium MD
    Posts
    491

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    Quote Originally Posted by shayne View Post
    its sch10 304 ss, nice and strong under high heat, and will reisist cracking much better than mild steel. all of the turbo supply lines for oil, coolant, and intake and exhaust plumbing should go right back on.
    for the record also, i mocked up this manifold while using a log turbo and intake to keep tabs on how far it has moved, and you could run this manifold on a log setup with a slight re-clocking of the turbo compressor housing.
    For the sake of conversation, how would the stainless handle being wrapped?

  19. #19
    Slugmobile & MeanMini Caretaker Turbo Mopar Contributor wheming's Avatar
    Join Date
    Nov 2010
    Location
    Raleigh Area, NC
    Posts
    4,809
    Quote Originally Posted by turbovanman View Post
    Wayne, delete some PM's, I need to talk to you about this, your first in line and others are waiting, thanks.
    should be set now. just re-upped my subscripy.
    Wayne H.

    '91 Dodge Spirit ES 2.5L turbo 5spd
    '05 PT GT 2.4T HO autostick (RIP)
    '89 Plymouth Acclaim 2.5L turbo auto, "Slugmobile" yes, THE Slugmobile!
    '89 Dodge Caravan SE 2.5L turbo auto, "Mean Mini" yes, Gus' Mean Mini! (Current best 11.699 @ 114.43 mph! - Oct 15th, 2022 Cecil County Dragway, MD)
    MeanMini dragracing videos: https://www.youtube.com/playlist?lis...URZLB1RxGYF6vw
    and other cars, trucks and motorcycles
    https://www.youtube.com/user/SlugmobileMeanMini

  20. #20
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 8 valve log header, stock flanges, turbo in damn near stock location.

    Quote Originally Posted by Tbird232ci View Post
    For the sake of conversation, how would the stainless handle being wrapped?
    Wrap away,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

Similar Threads

  1. Group 31 batt in stock location?
    By prepared in forum Electrical & Fuel System
    Replies: 27
    Last Post: 09-06-2010, 11:06 AM
  2. Engine stock turbo valve covers - CHEAP
    By 1984rampage in forum Parts Wanted
    Replies: 11
    Last Post: 11-26-2009, 07:48 AM
  3. Turbos/Intercoolers Stock td04h turbo with stock downpipe in good condition
    By 92spiritT3 in forum Parts For Sale
    Replies: 1
    Last Post: 08-24-2009, 05:16 PM
  4. Wideband in stock location?
    By Tony Hanna in forum EFI Tuning
    Replies: 30
    Last Post: 07-02-2009, 04:39 PM
  5. Stock Turbo Flanges - added
    By sexygomer in forum Old FAQ Info
    Replies: 2
    Last Post: 07-01-2007, 07:53 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •