Results 1 to 4 of 4

Thread: what size rings are on the 10:1 pistons and where to get them.

  1. #1
    Garrett booster
    Join Date
    Oct 2009
    Location
    pa
    Posts
    176

    what size rings are on the 10:1 pistons and where to get them.

    Well title says it all I am buying everything to rebuild my motor for 10:1. I have ordered a gasket kit and have a extra set of heads witch are going to the machine shops to get checked and a bolt hole fixed a snapped cam bearing bolt. I am getting a new non egr intake and jeep throttle body. So please a link would be nice to even summit if I would be only place to get them

  2. #2
    turbo addict Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,063

    Re: what size rings are on the 10:1 pistons and where to get them.

    91.1 bore 1.2 1.5 3.0 rings.
    Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56

  3. #3

    Re: what size rings are on the 10:1 pistons and where to get them.

    If you know the year of the motor, you can look it up on RockAuto. The surest way to know is pull a piston and measure the rings...
    Years ago I bought a used engine that came with '87 style rail and engine mounts. I pulled a piston to confirm the year of the engine and was surprised to find that it had the newer style 1.2mm top ring!

  4. #4
    turbo addict Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,063

    Re: what size rings are on the 10:1 pistons and where to get them.

    I bet quite a few early motors got rebuilt with all that valve guide seal oil burning disaster etc.
    Brent GREAT DEPRESSION RACING 1992 Duster 3.0T The Junkyard - MS II, OEM 10:1 -[I] Old - 11.5@125 22psi $90 [U]Stock[/U] 3.0 Junk Motor - 1 bar MAP [/I] 1994 Spirit 3.0T - 11.5@120 20 psi - Daily :eyebrows: Holset He351 -FT600 - 393whp 457ft/lb @18psi 1994 Spirit 3.0T a670 - He341, stock fuel, BEGI. Wife's into kid's project. 1990 Lebaron Coupe 2.2 TI/II non IC, a413 1990 Spirit 3.0 E.S. 41TE -- 1993 Spirit 3.0 E.S. 41TE -- 1994 Duster 3.0 A543 1981 Starlet KP61 Potential driver -- 1981 Starlet KP61 Parts -- 1983 Starlet KP61 Drag 2005 Durango Hemi Limited -- 1998 Dodge 12v 47re. AFC mods, No plate, Mack plug, Boost elbow -- 2011 Dodge 6.7 G56

Similar Threads

  1. Engine T3 pistons/pins/rings
    By MNmopar in forum Parts For Sale
    Replies: 5
    Last Post: 02-09-2012, 09:23 PM
  2. Where to get rings for SRT pistons?
    By turbovanmanČ in forum Engine - Block, Piston, Heads, Intakes
    Replies: 8
    Last Post: 02-02-2012, 02:32 PM
  3. Engine 2.5L pistons and rings
    By moparzrule in forum Parts For Sale
    Replies: 6
    Last Post: 03-21-2008, 09:54 PM
  4. Pistons and rings.
    By gvare001 in forum Parts For Sale
    Replies: 0
    Last Post: 08-08-2007, 07:30 PM
  5. I also need 2.5 pistons and rings!!
    By 3Bar_Mopar in forum Parts Wanted
    Replies: 0
    Last Post: 06-22-2006, 07:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •