so cleanin the TB i noticed my tb is coated in oil... had good luck on my last 2.5L with my breather set up but seems this one spits more oil... ok.. catch can time
looking around to see what i had laying around to catch oil, i found the killer BoostButton water bottle that were given in the goodie bag at 22... PERFECT!!! im hoping the plastic will hold up for a bit with the oily conditions... but eh well see...
using some stuff laying around and some Race Depot parts i made a catch can that cost me a total of $7.00!!!
first i had a little breather filter from my last set up, i popped the rubber grommet out of it so it just a metal base... on the lid of the water bottle had a plastic cap with a rubber mouth piece... just grabbed that and yanked it out... i fixed the breather filter to the top of cap
went to race depot and picked up 2 black "Shark Bite" 90 degree 3/4" barb fittings... i also had some 3/8" PVC pipe... i cut 3" of the PVC pipe, drilled out one end of the fitting to fit the 3/" PVC pipe inside...
this will be you IN.... the other 90 adjacent will be you OUT to air filter/box...
drilled 2 holes in the bottle and entrusted good ole JB to hold the fitting from the inside of the bottle sticking out...
ran a hose directly from VC port to the IN of the can, the hose from the OUT to the air filter inlet...
Reply With Quote
