Parting out, Complete '03 Black SRT4

[sy2206]

Date: 03rd November 2012
Username: sy2206
Full Name: Mark Christofferson
City, State, Zip: Stow, OH 44224
Contact: PM or email, sy2206 at yahoo dt com
Price: Depends on the part.


Hey Guys/Gals,
I've got a black 03 SRT4 that's getting parted out. It's got 122k miles, and the bottom end is toast (no compression in the #1 cyl). If the engine ran good, I'd keep it complete, but seeing as it's not running, lets do it piece by piece. A few things have been sold, but most of the car is up for grabs. It's pretty much stock, only mods are Exhaust Depot hard pipes, 3" catless downpipe, and a K&N short ram intake.

Shipping on most items shouldn't be a big deal. Things like the hood and decklid I'd rather sell local, anything else shouldn't be a problem.

Let me know what you need! Just FYI, this car is about 40 minutes away from. I have pulled a lot of parts and have them here with me, but I don't have everything. If you need something, you can pay me now, and I'll mark it as sold and get it pulled off and shipped as soon as possible. I planning on being there at least once a week, but if I sell a bunch of stuff, I will make a special trip over there to pull parts.

[1984rampage]

How are the tires? Price on rims + tires?

[BIG PSI]

Depending on price I may be interested in driver's front door, the hood, the decklid, and the door to window moldings from the other 3 doors. Plus I am in Uniontown, Ohio, so close to you.

Thanks
Chuck

PM me your prices on each and a total, plus your phone number .

[sy2206]

How are the tires? Price on rims + tires?

The tires are shot. I'm keeping two of the rims, the other two are up for grabs. So I guess if you're looking for a set, I can't really help you. If you're interested in just one or two, let me know and I'll take some close up picts of them for ya.

Depending on price I may be interested in driver's front door, the hood, the decklid, and the door to window moldings from the other 3 doors. Plus I am in Uniontown, Ohio, so close to you. Thanks, Chuck. PM me your prices on each and a total, plus your phone number .

PM sent!

[spoolinhard]

How much for the front bumper and are there any rips or tears on it?

[sy2206]

How much for the front bumper and are there any rips or tears on it?

Yeah, it's in kinda rough shape. It's definitely usable, but does have some small rips, and a couple spots that have been ripped and repaired already. I'll take some picts and get em over to ya.

[spoolinhard]

thanks

[sy2206]

Front fascia picts. It has been cracked and repaired on both sides, where they typically rip, on the bottom edge just outside of the main opening. Those repairs are pretty bad, and the putty or whatever they used is chipping off the back. It also has two rips at the bottom the the center beam of the crosshairs. Those have not been repaired, they must have happened sometime after the first ones were fixed. The paint obviously is trashed, lots of rock chips, lots of clearcoat peeling.

If anyone's interested in it, let me know. I might just hang it up in the corner of the garage. I also know a guy who does professional body work (and is an SRT owner), so I might have him fix it, then sell it as a "just needs paint, and it's ready to go" kind of a thing.

[boosted&tuned]

Are u still pating out this srt4?

[knownenemy]

Although this post is from over 5 months ago I'll ask anyway:
Do you by chance still have the coil packs and wires?
And are they the original ones(with 120K miles)?

Thanks!

[DetroitTurbo]

If you still have the vehicle I'm interested in at least 1 of the rims as a spare for my PT, maybe both if the price is right.

[GLHNSLHT2]

intake and throttle body available?

[JohnnyIroc]

shifter?

[sy2206]

Hey guys,
Yeah, this thread is back from the dead! I haven't done much with the car over the winter months, as parting stuff out is a pain in the --- when it's cold/snowy. Anyway, I do still have it, but much of it has been sold already.

Boosted&tuned, what are you looking for?

Knownenemy and Detroitturbo, I sent you both PM's.

GLHNSLHT2 and JohnnyIroc, the intake, TB, and shifter have all been sold.

[moparman76_69]

What kind of shape are the struts in? Also the Front knuckles with the brake hardware.

[glhs399]

Still have the plastic injector cover? If so how much with shipping to 97006 Beaverton Oregon.
Thanks!

[Badger]

I'll ask even though Im sure they are gone. Mark, did this car have the viper seats and are they still there if it did? and if for some reason it has them AND they are still there what are you asking for them?

[sy2206]

Hey guys,
I'm putting together an updated list right now, and will post it shortly. That has all the remaining items w/ prices. That'll make it easy on everyone. Stay tuned....

What kind of shape are the struts in? Also the Front knuckles with the brake hardware.

PM sent.

Still have the plastic injector cover? If so how much with shipping to 97006 Beaverton Oregon.
Thanks!

I do still have it. I've got one other guy infront of you who's interested in it. If he backs out, I'll let you know. You're next in line!

I'll ask even though Im sure they are gone. Mark, did this car have the viper seats and are they still there if it did? and if for some reason it has them AND they are still there what are you asking for them?

Yeah, the seats have already been sold.

[contraption22]

If you still have the complete battery tray, I could use one. Please PM with price shipped to 19083 if available.

Thanks!

[smallblockfreak]

How much for the k frame if its in good shape? 14895