Page 1 of 2 12 LastLast
Results 1 to 20 of 26

Thread: 91 Spirit R/T engine bay parts.

  1. #1
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    91 Spirit R/T engine bay parts.

    Date: 17th October 2012
    Username: turbovanman
    Full Name: Simon Field
    City, State, Zip: Abbotsford, BC
    Contact: PM


    Parts sales on hold, might have car sold!!!

    Ok, I won't be getting this running TIII again so basically need everything under the hood sold. I will be taking it apart in a few weeks and I have some parts already off so be patient please and if you want it, I'll hold your name in sequence.

    I probably have more than this so I'll add more as I go thru the piles.

    All parts plus shipping, and obo.

    Socketed computer with a 2 bar cal from Rob-$200
    Stock computer with middle piece broken but have the piece, needs gluing back in-$150
    Stock short block with oil pan, front gear. I drove this car before PO took it apart, did not knock, but needs rings and one bore has a slight ridge-$250
    3 Stock intake manifolds, one is blasted bare-$50 each
    Wiring harness-$150
    2 exhaust manifold's-$60 each
    Brand new FWD braided line kit-$80 SOLD
    Cam gears-$75 SOLD
    Cam sensor-$50
    Crank sensor-$75
    2 lower timing belt covers, rear lower mount is missing metal insert-$20 each
    4 A/C compressor mounts-can modify with the idler mod if needed. $50 stock, $75 modded.
    568 trans-$350 SOLD
    2 flywheels-$50 each ONE PENDING
    A/C compressor $50
    A/C lines $50 SOLD
    Stock BOV, small hose and T-pipe-$20
    Rad and fan, rad looks like its new, no fin corrosion and inside has no buildup-$300
    Stock airbox with K@N-$40
    Gauge pillar pod, black, 2 holes, 2 1/16", $40
    Power steering bracket and tensioner-$75
    Power steering pump with pulley-$50
    Brand new ARP head studs-$100 SOLD
    IC that bolted up front, brand unknown, opposite side exit, 2.5" pipes, 21 1/2x9x3 thick-$150
    Air box cover, has some damage at lip and looks like mount underneath broken-$75
    Waterbox with thermostat housing-$20
    52mm t/b with sensors-$30
    Fuel rail with stock injectors-$40
    Aurora plug wires-$35
    Black valley cover, needs repainting-$15 SOLD
    Brand new FWD exhaust manifold stud kit-$15 SOLD
    Stock turbo, needs rebuild, $75
    Blitz BOV with gray pipe like the OE pipe-$125 link to see it- http://www.addictiveperformance.com/...alve-blitz.phpPENDING

    https://encrypted-tbn0.gstatic.com/i...nfNYReO0ncIAI9

    ADDED

    Red FWD adjustable cam gears, no cores needed so these are outright. $325.
    Last edited by turbovanmanČ; 11-19-2012 at 01:43 AM.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  2. #2
    Hybrid booster Turbo Mopar Contributor
    Join Date
    May 2008
    Location
    Green Bay area Wisconsin
    Posts
    676

    Re: 91 Spirit R/T engine bay parts.

    "Brand new FWD exhaust manifold stud kit-$15"

    "Black valley cover, needs repainting-$" Which one is this and how much, interested if it looks stock and it's not the one with letters cut into it.

    "Brand new FWD braided line kit-$80" if these are new in the package, can you pm me with a package deal for all of the above?

    If you could give me a concrete cost on shipping the block to Illinois (61424) I may be interested in that too. No worries if you don't want to ship though.

  3. #3
    Hybrid booster
    Join Date
    Apr 2010
    Location
    eagleville pa
    Posts
    845

    Re: 91 Spirit R/T engine bay parts.

    i'd like a concrete cost on shipping the 568 to 19403 when you can simon.

  4. #4
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 91 Spirit R/T engine bay parts.

    I'll ship anything.

    Done and done, I'll PM you guys tomorrow.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  5. #5
    Supporting Member II Turbo Mopar Contributor DOHCRT's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, Az
    Posts
    512

    Re: 91 Spirit R/T engine bay parts.

    Cam pulleys and Studs to 85032.

    Will you split the A/C comp and lines? I just need a set of lines for the ends to make new ones.


    Vic in Phoenix
    dohcrt@cox.net

    91 Spirit R/T x4
    92 Spirit R/T x2
    89 CSX
    88 CSX-TIII
    84 Rampage TII
    97 Ram (Buzzin Half Dozen)
    69 Dart GT 'Vert

  6. #6
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 91 Spirit R/T engine bay parts.

    Quote Originally Posted by DOHCRT View Post
    Cam pulleys and Studs to 85032.

    Will you split the A/C comp and lines? I just need a set of lines for the ends to make new ones.
    Sure, what do you think is fair for the lines?
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  7. #7
    Supporting Member II Turbo Mopar Contributor DOHCRT's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, Az
    Posts
    512

    Re: 91 Spirit R/T engine bay parts.

    Quote Originally Posted by turbovanman View Post
    Sure, what do you think is fair for the lines?
    Half?


    Vic in Phoenix
    dohcrt@cox.net

    91 Spirit R/T x4
    92 Spirit R/T x2
    89 CSX
    88 CSX-TIII
    84 Rampage TII
    97 Ram (Buzzin Half Dozen)
    69 Dart GT 'Vert

  8. #8
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 91 Spirit R/T engine bay parts.

    Quote Originally Posted by DOHCRT View Post
    Half?
    Works for me. I'll get the lines off and get you a total. Thanks.

    ---------- Post added at 01:59 PM ---------- Previous post was at 01:58 PM ----------

    Quote Originally Posted by MNmopar View Post
    "Brand new FWD exhaust manifold stud kit-$15"

    "Black valley cover, needs repainting-$" Which one is this and how much, interested if it looks stock and it's not the one with letters cut into it.

    "Brand new FWD braided line kit-$80" if these are new in the package, can you pm me with a package deal for all of the above?

    If you could give me a concrete cost on shipping the block to Illinois (61424) I may be interested in that too. No worries if you don't want to ship though.
    Sorry, forgot to add the price, $15. It plain with no lettering. It could be an FWD unit but its beefier than the one I bought for my van. I'll snap a pic later, gotta bring my camera to work.
    Last edited by turbovanmanČ; 10-18-2012 at 09:06 PM.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  9. #9
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 91 Spirit R/T engine bay parts.

    Quote Originally Posted by onerippinturbo2 View Post
    i'd like a concrete cost on shipping the 568 to 19403 when you can simon.
    PM'd.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  10. #10
    Supporting Member II Turbo Mopar Contributor DOHCRT's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, Az
    Posts
    512

    Re: 91 Spirit R/T engine bay parts.

    [QUOTE=turbovanman;955679]Works for me. I'll get the lines off and get you a total. Thanks.[COLOR="Silver"]

    Just checking if you had a chance to get these items together... (Head Studs, Cam Gears and A/C Lines)


    Vic in Phoenix
    dohcrt@cox.net

    91 Spirit R/T x4
    92 Spirit R/T x2
    89 CSX
    88 CSX-TIII
    84 Rampage TII
    97 Ram (Buzzin Half Dozen)
    69 Dart GT 'Vert

  11. #11
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 91 Spirit R/T engine bay parts.

    [QUOTE=DOHCRT;956677]
    Quote Originally Posted by turbovanman View Post
    Works for me. I'll get the lines off and get you a total. Thanks.[COLOR="Silver"]

    Just checking if you had a chance to get these items together... (Head Studs, Cam Gears and A/C Lines)
    Doing some quotes today, work is a bit slow today. I won't have the lines off for a week or so though like i mentioned earlier.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  12. #12
    Supporting Member II Turbo Mopar Contributor DOHCRT's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, Az
    Posts
    512

    Re: 91 Spirit R/T engine bay parts.

    Thats cool, not in a hurry...Just want to make sure I'm on the list for the stuff


    Vic in Phoenix
    dohcrt@cox.net

    91 Spirit R/T x4
    92 Spirit R/T x2
    89 CSX
    88 CSX-TIII
    84 Rampage TII
    97 Ram (Buzzin Half Dozen)
    69 Dart GT 'Vert

  13. #13
    Garrett booster Turbo Mopar Contributor
    Join Date
    Oct 2012
    Location
    Baltimore, Maryland
    Posts
    139
    Quote Originally Posted by turbovanman View Post
    Date: 17th October 2012
    Username: turbovanman
    Full Name: Simon Field
    City, State, Zip: Abbotsford, BC
    Contact: PM

    Ok, I won't be getting this running TIII again so basically need everything under the hood sold. I will be taking it apart in a few weeks and I have some parts already off so be patient please and if you want it, I'll hold your name in sequence.

    I probably have more than this so I'll add more as I go thru the piles.

    All parts plus shipping, and obo.

    Socketed computer with a 2 bar cal from Rob-$200
    Stock computer with middle piece broken but have the piece, needs gluing back in-$150
    Stock short block with oil pan, front gear. I drove this car before PO took it apart, did not knock, but needs rings and one bore has a slight ridge-$250
    3 Stock intake manifolds, one is blasted bare-$50 each
    Wiring harness-$150
    2 exhaust manifold's-$60 each
    Brand new FWD braided line kit-$80
    Cam gears-$75
    Cam sensor-$50
    Crank sensor-$75
    2 lower timing belt covers, rear lower mount is missing metal insert-$20 each
    4 A/C compressor mounts-can modify with the idler mod if needed. $50 stock, $75 modded.
    568 trans-$350
    2 flywheels-$50 each
    A/C compressor and lines-$100
    BOV, small hose and T-pipe-$20
    Rad and fan, rad looks like its new, no fin corrosion and inside has no buildup-$300
    Stock airbox with K@N-$40
    Gauge pillar pod, black, 2 holes, 2 1/16", $40
    Power steering bracket and tensioner-$75
    Power steering pump with pulley-$50
    Brand new ARP head studs-$100
    IC that bolted up front, brand unknown, opposite side exit, 2.5" pipes, 21 1/2x9x3 thick-$150
    Air box cover, has some damage at lip and looks like mount underneath broken-$75
    Waterbox with thermostat housing-$40
    52mm t/b with sensors-$30
    Fuel rail with stock injectors-$40
    Aurora plug wires-$35
    Black valley cover, needs repainting-$15
    Brand new FWD exhaust manifold stud kit-$15
    Stock turbo, needs rebuild, $75
    Blitz BOV with gray pipe like the OE pipe-$125 link to see it- http://www.addictiveperformance.com/...alve-blitz.php

    https://encrypted-tbn0.gstatic.com/i...nfNYReO0ncIAI9
    If the blitz bov will work with the set up we've been talkin about for my car, add it to my bill. $100? And we still gotta catch up sometime and talk specs

  14. #14
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 91 Spirit R/T engine bay parts.

    Quote Originally Posted by NeverLow View Post
    If the blitz bov will work with the set up we've been talkin about for my car, add it to my bill. $100? And we still gotta catch up sometime and talk specs
    I have a PM on the BOV, if it falls thru, your next.

    Yep, we do,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  15. #15
    Garrett booster Turbo Mopar Contributor
    Join Date
    Oct 2012
    Location
    Baltimore, Maryland
    Posts
    139

    Re: 91 Spirit R/T engine bay parts.

    [QUOTE=turbovanman;956703]I have a PM on the BOV, if it falls thru, your next.

    Yep, we do, [/QUOTE

    Sounds good, ttys

  16. #16
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 91 Spirit R/T engine bay parts.

    If I've missed anyone, post up or PM please, losing track,

    ---------- Post added at 01:14 PM ---------- Previous post was at 01:07 PM ----------

    Just added adjustable cam gears.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  17. #17
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 91 Spirit R/T engine bay parts.

    List updated.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  18. #18
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 91 Spirit R/T engine bay parts.

    Bump, some deals fell thru.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  19. #19
    Supporting Member II Turbo Mopar Contributor DOHCRT's Avatar
    Join Date
    Dec 2005
    Location
    Phoenix, Az
    Posts
    512

    Re: 91 Spirit R/T engine bay parts.

    Did you get a total price for the studs, gears and the a/c lines yet?


    Vic in Phoenix
    dohcrt@cox.net

    91 Spirit R/T x4
    92 Spirit R/T x2
    89 CSX
    88 CSX-TIII
    84 Rampage TII
    97 Ram (Buzzin Half Dozen)
    69 Dart GT 'Vert

  20. #20
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: 91 Spirit R/T engine bay parts.

    Quote Originally Posted by DOHCRT View Post
    Did you get a total price for the studs, gears and the a/c lines yet?
    I did, I pm'd you didn't I, and remember, I said it will be a few weeks, but with the rain, its a bit longer, lol. If not, I'll do it again on Monday, shippers are closed now. They are still yours,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

Page 1 of 2 12 LastLast

Similar Threads

  1. Electronics 1991 Spirit TI engine bay wiring harness
    By blk86trbo in forum Parts Wanted
    Replies: 9
    Last Post: 09-29-2011, 02:15 PM
  2. cleaning up the engine bay?
    By TurboII in forum Maintenance & General Tech
    Replies: 7
    Last Post: 09-14-2010, 05:44 PM
  3. T1 engine bay
    By omniac in forum Interior & Exterior Restoration
    Replies: 19
    Last Post: 08-27-2009, 10:14 PM
  4. T-II SMEC engine bay harness and L-body A/C parts
    By RIFF-RAFF in forum Parts For Sale
    Replies: 0
    Last Post: 12-11-2006, 07:01 PM
  5. Replies: 3
    Last Post: 06-07-2006, 09:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •