Charger goes 10.04 @ 143mph

[fishcleaner]

If memory serves, after having all the pieces worked out and after cutting up several intakes and measuring every nook and cranny. I sat at the tig bench for three solid days putting that together! lol

Now I was (and still am) a novice tig welder, so there's that + it was all in the fitment and making sure everything was exactly how I wanted it before sealing it up.

I remember thinking the same thing as when I drilled all the holes in the rear trailing axle. Why oh why didn't I just build it from scratch!

---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------



qft!!!!!!

I can appreciate what you did, I went through the exact same thing, cutting up intakes and learning to weld, if anybody is sitting on the fence about learning to weld, get one, I wish I did years ago.

[GLHS592]

I've been out of the loop the last few years. This is awesome! Great job!

[Shadow]

I can appreciate what you did, I went through the exact same thing, cutting up intakes and learning to weld, if anybody is sitting on the fence about learning to weld, get one, I wish I did years ago.

And that's where I have no regrets. The shear confidence of knowing IF I screwed the whole thing up I could just cut up more pieces and try again is what made all the difference. (+ I had about 20 1 pieces, no eg)

If I would have had 4-500.00+ worth of custom billet and fab pieces I would have $hit and been way to nervous, would have had to let someone else do it

---------- Post added at 08:00 PM ---------- Previous post was at 07:56 PM ----------

Congrats!Rob!

Awesome achievement. Shows how good the stock parts are.

9's are there.

I've been out of the loop the last few years. This is awesome! Great job!

Thanks guys!

[turboshad]

C'mon Rob, everyone knows only CBs came in red. Sheeesh.

[Shadow]

C'mon Rob, everyone knows only CBs came in red. Sheeesh.

Shhtttttt, your gonna blow my cover............again!